Adds support for new products and brings fix for various issues
Improvement(s)
? Support release for the following new products and their associated software blocks:
- TesiraFORTÉ X 400
- TesiraFORTÉ X 800
- TesiraFORTÉ X 1600
? Added TTP commands to query media traffic status and query/set POE settings on TesiraCONNECT devices.
? Added TTP commands to query/retrieve the Dante status on the TesiraCONNECT TC-5D
? Added the ability to filter Dante stream advertisement traffic from Port 1 of the TesiraCONNECT TC-5D via a software checkbox.
? Added the ability to assign meters to TesiraCONNECT TC-5D devices.
? Added to ignore unsolicited ARP requests in VoIP card configuration.
✔ ️ Improved Event Logging to use block instance tags in user log.
Resolved Issue(s)
✔ ️Software - Disabled the ability to modify the TesiraCONNECT TC-5D IP address through the Dante Settings tab.
✔ ️ Firmware - Resolved an issue that could cause a device to become unresponsive after making changes to a VoIP config.
✔ ️ Firmware - Resolved an error where the device clock to gets reset after a reboot.
✔ ️ Firmware - Resolved situation where a TC-5D would report "Dante card in slot 2 has all s down" or where a TC-5D re-boot could generate a Slot 2 fault.
✔ ️ Firmware - Resolved issue that prevented certain expanders (TCM-1, EX-UBT, POE Amps.) from being discovered by TC-5/TC-5D.
✔ ️ Firmware - Resolved an issue where a TC-5D could present as a TC-5.
✔ ️ Firmware - Resolved issue in which a TC-5D has discovery problems with IGMP settings disabled.
✔ ️ Firmware - Corrected the MAC address reported by the TC-5/TC-5D.
✔ ️ Firmware - Solved a problem where TC-5D Dante connection status faults would not resolve when the configuration was cleared.
✔ ️ Firmware - Fixed problem where TC-5D RSTP would not enable on re-boot when the option was enabled.
✔ ️ Firmware - Resolved problem where setting the Dante IP address could lead to a TC-5D becoming unresponsive.
✔ ️ Firmware - Solved a problem that when a specified NTP server was unavailable, the Firmware NTP function would fail to start.
✔ ️ Firmware - Fixed a firmware problem that resulted in Tesira Control Tunneling not working.