Firmware Update Resolves Multiple Touchscreen and MIDI Issues

New Features:

Nothing known

Enhancements:

Nothing known

Fixed Bugs:

• Touchscreens no longer freeze on the ampersand screen during firmware updates.
• Resolved issues related to Dyn8, including:
• Erroneous 'Insert Bypassed' message.
• Stereo mix channels losing Dyn8 assignment after reboot.
• Listen function now works for Dyn8 bands.
• Screen application no longer crashes during shutdown attempts.
• Fixed Soft Key discrepancies:
• Invalid assignments no longer appear.
• Tap Tempo flashes accurately at every beat.
• Talkback now works correctly in momentary mode.
• Global Direct Out source no longer switches to Post Preamp after viewing the Routing screen.
• Event Logs no longer cause memory issues after prolonged use.
• Locking the mixer now effectively locks all screens.
• Fan status reports only when stalled at boot up.
• Mix channel delays are now correctly displayed after bus config changes.
• Static IP address is now correctly greyed out when activating DHCP.
• Show recall from the Director Show manager now functions reliably.
• Block strip assignments now work correctly.
• MIDI strips in Director now send accurate MIDI messages.
• MIDI MMC controls operate reliably on every press.
• Template Show overwriting on USB drives no longer causes errors.
• Solo In Place softkeys in Director now enable SIP properly.

Open Issues:

• GX4816 connected to gigaACE card during show recall can cause erroneous log errors.
• AES and Wordclock settings are not persistent after reboot and fail to update correctly after a Show recall.
• Recalling a V1.0x Show from the Director may fail while running Director online.
• MIDI Softkeys in Director send both 'on press' and 'on release' events when activated.
• DCA Spills do not function in Director when online.
• LPF/HPF GUI does not appear in bank view when off.
• Touch and hold on Microsoft Surface does not trigger right-click menu on custom rotaries.

Update Instructions:

Nothing known