Actuators for Smart Home & Building

Smart Home and Building actuators are devices that are used to manipulate the physical environment, operating with the controlling valves used in any smart environment. They are performing in the reverse direction of the sensors, taking the electrical input from the control system and turning it into tangible action, such as changing the light or heat in the smart environment.

Top 10 products from the area Actuators

1

KNX Shutter Actuator

Gira
KNX Shutter Actuator

1 Compatibilities0 Updates0 Discussions289 Follower

Shutter Actuators

2

MTN649704

Schneider Electric
MTN649704

1 Compatibilities1 Updates0 Discussions286 Follower

Shutter Actuators

3

2504 REGHER

Jung
2504 REGHER

2 Compatibilities0 Updates0 Discussions281 Follower

Shutter Actuators

4

TYA604A

Hager
TYA604A

2 Compatibilities0 Updates0 Discussions234 Follower

Switch Actuators

5

Servo 3

Gira
Servo 3

1 Compatibilities0 Updates0 Discussions214 Follower

Radiator Thermostats

6

Valve Drive Actuator VAA/S

ABB
Valve Drive Actuator VAA/S

2 Compatibilities0 Updates0 Discussions190 Follower

Heating Actuators

7

Heating Actuators AKH

MDT
Heating Actuators AKH

2 Compatibilities0 Updates0 Discussions181 Follower

Heating Actuators

8

Wiser MEG5935-0000

Schneider Electric
Wiser MEG5935-0000

1 Compatibilities0 Updates0 Discussions169 Follower

Radiator Thermostats

9

TYA664BN

Hager
TYA664BN

2 Compatibilities0 Updates0 Discussions167 Follower

Dimming Actuators

10

LED Dimmer UD/S

ABB
LED Dimmer UD/S

2 Compatibilities0 Updates0 Discussions164 Follower

Dimming Actuators

Please enable Javascript to use the full functionality.
Below are only a small part of the products shown. As soon as you activate Javascript you can view further products and filter them according to your ideas.

The Gira KNX Shutter Actuator is a 4-gang device with manual actuation and a status display for every output.

MTN649704 is a 4-fold KNX Shutter Actuator for 230VAC.

The Jung 2504 REGHER is a 4-gang KNX device for 230V AC with a manual electronic operation and LED status indication.

The Hager TYA604A is a 4-fold KNX actuator that can be a switch or a blind actuator, suitable for different external conductors.

The Gira Servo 3 is an electro motor-powered radiator thermostat for the KNX bus, including an integrated room temperature sensor.

The ABB Valve Drive Actuators VAA/S are heating actuators that have 6/12-channel devices for KNX, used for heating/cooling systems.

The MDT Heating Actuators AKH are 4-8 fold KNX devices for 24-230 VAC with extensive application functions.

The Schneider Electric Wiser MEG5935-0000 is a radiator thermostat for room temperature control.

The Hager TYA664BN is a 4-fold dimming actuator for KNX 600W with integrated LED and protection features.

The ABB LED Dimmer UD/S actuators are 2/4/6-fold for KNX, optimized for dimming retrofit LED lamps.

The Eaton CHVZ-01/05 is a wireless radiator thermostat for home heating automation.

The Somfy Thermostatic Radiator Valve helps to easily set the desired temperature in every room.

The Hager TXA664D is a 4-fold DALI Dimming Actuator working with KNX, with automatic load detection.

The ABB UD/S4.210.2.1 is a 4-fold KNX LED dimming actuator with multichannel options, optimized for retrofit LED lamps.

The Theben LUXORliving H6 is a heating actuator, used for the control of thermal actuators.

The Busch-Jaeger Energy Actuator is a 3gang switch actuator suitable for summing the total outputs of several devices.

The Gira Dimming Actuator is a 4-gang KNX device, used for dimming and switching various smart home lamps.

The Jung FM UD 420250 REG is an eNet radio dimming actuator with full-encrypted radio transmission, suitable for rail mounting.

The ABB HA-S-2-WL is a room thermostat for temperature regulation of water-bearing heat solutions.

The Theben HM 6 T is a 6-way KNX heating actuator, controlling thermal actuators for heating and cooling.

The Jung 3904 REG is a 4-gang dimming actuator for KNX, used for LED and LED module control.

The Jung 23006 1S R is a 6-gang switching actuator device for KNX, with a manual electronic operation.

The ABB Shutter Actuators JRA/S are 2/4/8-fold KNX devices used for control of independent 230V AC drives.

The Hager TYA624A is a 4-fold KNX shutter actuator for 230V.

The Shutter Actuators JAL are 2/4/8-fold KNX devices for 230VAC, used to control the independent shutter or sunblind drives.

The Theben LUXORliving J8 is an 8-fold KNX Shutter Actuator for 110 – 240 V AC, for controlling drives for vision protection devices.

The Switch Actuator AKS Standard 16A has up to 24 folds for KNX at less space, thus lower costs per channel.

The Schneider Electric REG-K/4x230/16 is a 4-gang KNX switch actuator for independent switching of loads.

The MDT KNX Time Switch is a 20-channel switch with an 8-cycle time for each channel, providing a switching function and adequate power for the bus voltage fails.

The MDT Switch Actuator AKI is a 4/8/12-fold industry device for KNX, suitable for extreme high inrush currents.

The Jung 2336 REG HZR HE is a 6-fold KNX device for 24-230 VAC with manual electronic operation and LED status indication.

The TXM646T is a 6-fold KNX heating actuator for 24-230 VAC.

The Gira switching and blind actuators are designed to control various electronic devices, ideally suited for residential buildings and commercial systems.

The ABB AT/S4.20.1 is a 4-fold KNX switch actuator for 20A.

ESR62NP-IP/110-240V is an impulse switching relay IP over Wi-Fi, with 1 NO contact, not potential free 16A.

The Schneider Electric REG-K/2x230/16 is a switching actuator for independent loads with an integrated bus coupler.