Support for LiveTrax auto track naming feature

Improvements

Additional Features:

• ID-1980: Support for LiveTrax auto track naming feature.
• ID-1986: Support new channel display hardware.

Issues Fixed:

• ID-1951: Original channel displays with no ID now illuminate correctly.

Known issues

Known issues – SQ-Drive:

Loss of power or unplugging a device during multi-track or stereo record may result in the
current recording being lost.

Known issues – Audio not passing when attempting to load an unavailable add-on:

When loading a show which uses an add-on not available in the installed firmware, a default
processing unit will be loaded, but audio will not pass until the processing has been switched
out. This can happen when a show saved on newer firmware is loaded into an SQ running
older firmware.

Known issues – Incorrect sync with MixPad when Mixer Config is changed:

Adjusting the Mixer Config on the desk will cause issues in the SQ-MixPad I/O Patch screen
until the app has been disconnected and reconnected. For this reason, SQ-MixPad should
only be connected after Mixer Config settings have been applied at the desk.

Known issues – Loaded MixPad Offline show not copied when updating on PC/Mac:

When updating the SQ MixPad app on a PC or Mac, the show loaded in Offline mode is not
automatically copied across to the new version. Best practice is to store the currently loaded
show before updating, then install the new version of MixPad and recall the show being
worked on before uninstalling the older version.

Known issues – Last preamp not working on ports 1-3 of DX Hub:

The final input on a cascaded DX168 or DX164W or on a DX32 expander, when connected
to DX Hub ports 1, 2 or 3, does not work. i.e. SLink port input sockets 32, 64 and 96 from a
DX Hub.