The manufacturer Audinate has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

The 'Use Shared Dante Interface' option has been reinstated

What's New:

Dante Controller 4.13.0

  • Improved support for Dante Director and Dante AV Ultra
  • The 'Use Shared Dante Interface' option has been reinstated
  • Added button to open the Dante AV Ultra configuration web interface
  • Updated the Dante AV Ultra plugin to support both J2K and Colibri codecs

Dante Updater 2.6.1

  • Improved support for Dante Director
  • The Dante Interface can now be manually selected (in unmanaged mode)
  • User interface language can be set to 'auto-detect' (this is now the default setting)

Dante Activator 2.6.0

  • Improved support for Dante Director
  • User interface language can be set to 'auto-detect' (when selected in Dante Controller)

Supported Platforms:

  • Windows 11
  • Windows 10

Requirements:

  • All operating systems should be updated to the latest available version.

Note: Dante Controller requires 64-bit capable hardware.

Notes:

Installing or Updating Dante Controller

To install Dante Controller you will need to be logged on with administrator privileges.

Note: You do not need to uninstall the previous version before installing this update.

To install Dante Controller:

  • Ensure you are logged on to your computer as an administrator.
  • Navigate to and double-click the downloaded Dante Controller installer file.
  • Read the license agreement. If you agree to the terms, select the 'I agree' checkbox and click Install.
  • If you do not agree to the terms, click Close.
  • Confirm / acknowledge any Windows security prompts that are displayed.

Bug Fixes:

Dante Controller v4.13.0

  • CS-1182: Dante Controller should check that a device is capable of contacting Director before allowing it to be enrolled
  • CS-1203: Dante Controller does not authenticate to Director on first URL launch after fresh install
  • CS-1143: Devices don't show up in the Dante Controller routing matrix when enrolled in Dante Director
  • CS-1116: Dante Controller should use the host O/S certificate store. By using the host O/S certificate store, we allow system administrators to implement security schemes without needing to directly interface with Dante Controller or creating out-of-policy exceptions.
  • CS-1212: Dante Controller filter panel doesn't recognise Dante AV Ultra Rx Infrared channel
  • CS-1220: Packet errors not cleared on Zync IP Core, AVIO, DVS (or not counted on Via)
  • CS-1209: The 'Use Shared Dante Interface' option has been reinstated

Dante Updater v2.6.1

  • CS-1298: Device details cannot be retrieved after changing the network interface in Dante Updater.
  • CS-1300: If logged into Director or Dante Domain Manger, changing the network interface in Dante Updater prevents a different Site/Domain from being selected.
  • CS-1302: If logged into Director or Dante Domain Manger, the select all option limits selection to devices on the current interface.

Dante Activator v2.6.0

  • LT-861: Security updates
  • NIMBUS-1544: Fixed Manufacturer / Model Id filtering was not working

Known Issues:

Dante Controller v4.13.0

  • No new known issues

Pre-existing known issues (from Dante Controller v4.12.0)

  • ETS-4467: Column sort for event log does not sort alphanumerically
  • CS-673: Windows About dialog incorrectly identifies OS version
  • CS-664: DC for Windows crashes with > 255 devices in a single unmanaged subnet (no DDM)
  • CS-477: Software update window language may not match the Dante Controller Language
  • KAS-233: Unmanaged multicast bandwidth value does not include video media
  • CM-1402: DDM interop: Dante Controller incorrectly allows enrolled Brooklyn II devices at v4.0.9.2 firmware to create AES67 flows. Workaround: Reboot the Brooklyn II device.
  • CM-1424: DDM interop: The 'Create Multicast Flow' dialog incorrectly reports support for 64 channels / flow for SMPTE configs that only support 8.
  • CM-1432: DDM interop: Dante Controller shows SMPTE clock domains 1, 2 and 3 as sample rate pull-up clock domains in the clocking status tab.
  • CS-1191: On some systems the Dante Activator application can take up to a minute to launch

Dante Updater v2.6.1

  • No new known issues

Pre-existing known issues (from Dante Updater v2.6.0)

  • PP-78: DDM interop: No prompt shown when DDM is down
  • NIMBUS-670: The Select All Button in Library does not react to the search filter

Dante Activator v2.6.0

  • None
Version: Windows 4.13.1.1 Link
Receive Important Update Messages Stay tuned for upcoming Audinate Dante® Controller updates

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad