How to set up the Auto Tracking mode?

You can set up the Presenter and the Zone mode.

The Presenter mode can be set like the following:

• In order to adjust the camera view properly use the IR remote, then save the preset as the initial position
• On the IR remote, press tracking "On"
• Then, press the "Upper body" key to get a close view of up to 60% of the body, or Full to see the entire presenter
• If you want to switch between the presenters, press "Switch"

In the Zone mode, there are 2 blocks initially selected, and preset 6 is initially the starting position. To change it, you can perform the following:

• To adjust the camera view properly, use the IR remote and save the view to preset6 or preset7
• To switch the tracking mode from Presenter to Zone mode - long press "Tracking Point"
• Finally, press "ON" and the Zone mode is set