How can I customize settings?

To customize settings you first have to enter the configurator

How to enter the configurator:

There are three ways to access the Configurator:

• Via the LAN
• Direct Ethernet connection between PC and Base Unit.
• Via the Base Unit's wireless network
  When accessing the configurator for the first time, the ClickShare Configuration Wizard starts automatically.
  This configuration wizard can be started at any moment to change your configuration instead of using the
  menus.

To access the Configurator via the LAN

1. Open a browser. Note: Supported browsers are Microsoft Edge, Firefox, Google Chrome and Safari.
2. Browse to the IP address of your device. Note: If you do not know the IP address due to Show network info is disabled, connect via a direct connection or via a wireless connection to your device to discover the wired IP address.

A login screen appears.

1. To change the language of the Configurator, click on the drop down next to the current selected language
   and select the desired language.

1. Enter the user name 'admin' and the password, read and accept the EULA and the Privacy policy and click OK.
   By default, the password is set to 'admin'.

Warning: It is strongly recommended to change the default password into a strong password on first use, to prevent that anyone else accessing the configurator can change the settings of the ClickShare Base Unit. See section “Security, passwords”.

To access the Configurator via a direct connection

1. Connect the Base Unit to your laptop using an Ethernet cable.
2. On your laptop, open a browser. Note: Supported browsers are Microsoft Edge, Firefox and Safari.
3. Browse to http://192.168.1.23. A login screen appears.
4. Enter the user name 'admin' and the password, read and accept the EULA and click OK.
   By default the password is set to 'admin'.
   The configurator opens. The wired IP address is given on the startup page.

To access the Configurator via the Base Unit wireless network###

1. On your laptop, connect to the Base Unit wireless network.
   The default SSID and password to connect to the Base Unit are respectively 'ClickShare-<serial base=""></serial> number>' and 'clickshare'.
2. On your laptop, open a browser. Note: Supported browsers are Microsoft Edge, Firefox and Safari.
3. Browse to http://192.168.2.1. A login screen appears.
4. Enter the user name 'admin' and the password, read and accept the EULA and click OK.
   By default the password is set to 'admin'.
   The configurator opens. The wired IP address is given on the startup page.

From here you can start changing the settintgs