How do I set Mircast?

Activate

• Log in to the ClickShare. Go to Service and activate Miracast.

Possibilities of the Miracast

Standard use of the base unit

• The use of a ClickShare button enables the Internet connection to be maintained. A direct connection to the base unit is required to use the ClickShare app, AirPlay or Google Cast. Internet access is then only possible if the device supports the simultaneous use of data (3G/4G). Please note that the access point of the base unit must not be switched off and must be visible and available to everyone for the connection.

Setup with network connection

• Users can share content via the ClickShare desktop app, ClickShare mobile app, AirPlay, Google Cast via the network the base unit is connected to without losing internet connectivity.

Setup with dual network connection

• On the C-5, C-10 Gen2, the dual network connection topology disables the base unit access point
  and the buttons must be connected to the base unit via enterprise access points.
• Note that the wireless conferencing capabilities of the ClickShare Button may be limited when the Button is
  Button may be limited if the Button is integrated into the corporate network and its performance will depend on the internal
  network.
• Users can share content via the ClickShare desktop app, the ClickShare mobile app, AirPlay, Miracast
  and Google Cast to the Base Unit via one of the networks to which the Base Unit is connected.
  Miracast MS-MICE is only available via the LAN connection, all other devices connect directly via
  Wi-Fi Direct to the base unit.
• ClickShare Base Units can be integrated into a dedicated network or VLAN, but dedicated firewall rules must be adopted.
  dedicated firewall rules must be adopted so that the streams can pass through the various network sections.
  can pass through the different network sections.

Dedicated network configuration

• In this configuration, ClickShare Buttons and the Base Unit are used directly ready for use (Buttons
  must be paired with the Base Unit before they can be used). Since the Base Unit is installed in a
  dedicated network, a firewall configuration is required to prevent the use of the
  ClickShare desktop app, ClickShare mobile app, AirPlay and Google Cast over the network.
  over the network.
• If the firewall is not configured to allow connection from the guest Wi-Fi or the employee Wi-Fi
  users can connect to the Base Unit wireless access point to share content via the ClickShare desktop app.
  the ClickShare desktop app, the ClickShare mobile app, AirPlay or Chromecast, and can connect to the Internet
  only connect to the Internet if the device supports simultaneous data usage (3G/4G/5G).
  Please note that the access point of the base unit must not be switched off and must be visible and available to everyone for the connection.
  connection must be available to everyone. Mobile users are limited to the experience described in the
  standalone configuration. For Miracast, the Base Unit must be configured for Miracast,
  so that it provides a Wi-Fi Direct connection.