New Software Update for DesignMax and AMM Models

New Features:

• Added support for new DesignMax models: DM3P, DM5P, DM6PE, and DM10P-SUB. Loudspeaker EQs, Project View icons, and PM loudspeaker EQ now include these items.
• Added support for new AMM models: AMM108, AMM112, and AMS115 subwoofer. Loudspeaker EQs, Project View icons, and PM loudspeaker EQ now include these items.

Enhancements:

Nothing known

Fixed Bugs:

Nothing known

Open Issues:

General Issues

• CSD can encounter various issues if a Commercial Sound Processor (CSP) or PowerSpace+ is plugged into the same network. Disconnecting the device resolves the issues. (CSUPDATES-5509)
• If a USB Module is not wired to an Output Module, that Module will not show Metering data. (CSUPDATES-6112)

CSD Logic Blocks

• Assigning a Logic Action from an ESP-00 to a Trigger on an EX-1280 will result in an error. (CSUPDATES-6113)
• The states of Logic Connectors within the Logic Wiring View may sometimes show the incorrect state. This does not affect functionality.
• If you connect the logic out of a USB to a Meter Set Recall block, when you go online, the connection disappears. (CSUPDATES-6108)
• PSet is not recalled via the PSetRecall block if the PSet ion within the PSetRecall block is changed after wiring. (CSUPDATES-6109)
• The logic out of the meter block never changes, although it triggers correctly. (CSUPDATES-6110)

Under Table Boxes

• The EX-8ML may boot up with a Local address upon first use, rather than DHCP. Rebooting the device will revert the address to DHCP. (CSFLAM-261)

Telephone Call Functionality

• PSTN and VoIP Ring and Voice Levels are not being properly set. There is no audible difference between 0 dB and +10 dB. (CSFLAM-202)

ControlSpace Remote

• On an Avaya system, it is not possible to end a VoIP call with CSR when the Far End is in a "Hold" state. (CSUPDATES-4352)

Other Issues

• When programming Selectors, Gains, Analog s/Outputs for GPI digital, they may not function when using EX-1280C with Legacy devices. (CSUPDATES-6116)
• PowerMatch will not alert the user to a Digital Audio loss (Dante, AmpLink, ESPLink, CobraNet, or other Digital Audio Sources). (PROSUPPORT-399)

Update instructions

Nothing known

Update Instructions: