The manufacturer Cisco has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Bug fixes and workarounds

Bug fixes

CSCwd60295 - WrongSTP output may be visible ifSTP is disabled and mode is set toPVST or RPVST.
CSCwe64339 - Management ACL generates error for built-in probe.
CSCwe64160 - FATAL error when enabling MSTP and show spanning-tree detail on a stack.
CSCwd59624 - The "SmartPort is enabled" line must be removed from the "display macro auto ports" command.

Known issues

CSCwe76469

Symptom

  • CBD probe does not respond when HTTPs port is changed.

Workaround

  • After changing the HTTPs port, disable the CBD probe and then enable it again, or set the CBD
  • probe with the CLI command "cbd reset" or the WEB GUI button "Reset Connection".

CSCwe76605

Symptom

  • On the CBD settings page, the plain text input field for the Access Key Secret is grayed out.

Workaround

  • Click on the plaintext field, then change to encrypted, then back to plaintext.

CSCwe87662

Symptom

  • Cannot start the CBD Connection Wizard on a standalone device with device ID 2.

Remedy

  • Configure as device 1.

CSCwe87686

Symptom

  • Sometimes the "clear ipv6 neighbor binding table" command can cause unexpected log messages on the console.

Workaround

  • None
Version: 3.3.0.16 Link
Receive Important Update Messages Stay tuned for upcoming Cisco Business 250 Series updates

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad