The manufacturer Cisco has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Multi-Homing Configuration in BGP EVPN VXLAN Fabric

Release Notes for Cisco Catalyst IR1101, IR1800, IR8140, and IR8340 Routers - Cisco IOS XE 17.17.1

New Features in Cisco IOS XE 17.17.x

Feature Name: Multi-Homing Configuration in BGP EVPN VXLAN Fabric
License Level: Network Essentials and Network Advantage
Description: By utilizing EVPN Ethernet Segments with VLANs mapped to Switched Virtual Interfaces (SVIs), you can implement multi-homing within an EVPN VXLAN fabric. Thus, it enhances network resilience, offers redundancy, and optimizes resource utilization. Earlier, single-model procedures for EVPN restricted configurations to either Bridge Domain (BD) or VLAN.
Supported Devices: IR1100 and IR1800

Feature Name: Serial MPLS Pseudowire
License Level: Network Essentials
Description: From this release, you can transfer the serial async data using an MPLS label over a pseudowire between two IR8340 edge routers. In this scenario, one of the edge routers is located at the substation end and another edge router is located at the controller end.
Supported Devices: IR8340

Caveats
Caveats describe unexpected behavior in Cisco IOS XE releases. Caveats listed as open in a prior release are carried forward to the next release as either open or resolved.

Open Caveats in Cisco IOS XE 17.17.1
Identifier: CSCwn98622
Description: Hardware removal & insertion SNMP traps received after soft reload—misleading router actual activity.
Platform: IR8140

Resolved Caveats in Cisco IOS XE 17.17.1

Identifier: CSCwm67835
Description: Observing high offset values when configuring two NTP servers with GNSS as the reference clock.
Platform: IR8340

Identifier: CSCwm40611
Description: SNMP queries on serial interfaces fail after enabling 'physical-layer async' configuration.
Platform: IR8340

Identifier: CSCwm57517
Description: Serial interface descriptions are not visible following a power cycle of the IR8340 router.
Platform: IR8340

Identifier: CSCwn11290
Description: Input errors detected on the GigabitEthernet0/0/0 interface.
Platform: IR8340

Identifier: CSCwn31694
Description: Memory leak caused by the Precision Time Protocol (PTP) process in the linux_ios-imag module.
Platform: IR8340

Identifier: CSCwn31061
Description: GigabitEthernet0/0/5 interface on the expansion module enters 'err-disabled' mode when traffic exceeds 480 Mbps.
Platform: IR1101

Identifier: CSCwn80507
Description: Tracebacks followed by CPU hogs observed when inserting the IRM-GNSS-ADR VID: V20 module into the IR1833 router.
Platform: IR1800

Identifier: CSCwo13365
Description: Revert the fix from CSCwh37024 and maintain the default cellular MTU at 1500 bytes.
Platform: IR1800

Version: IOS XE 17.17.1 Link
Receive Important Update Messages Stay tuned for upcoming Cisco Catalyst IR1800 Rugged Series updates

More from the IT Infrastructure section

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad