Added support for sharing CEN-GW1 and CENI-GW1

CP4-R V2: Please confirm that your processor is a V2 model before loading FW manually. To confirm, connect to the processor via text console in Toolbox and issue the command "ver -v". The model number on the first line will show "CP4-R (HW Ver 2) Cntrl Eng". If wrong file is used there are no side effects, and the Firmware upgrade will fail.​

New Features

• Introduced support for a Global PIN Code, enabling its use on Crestron touch screens.
• Enabled the loading of custom branding logos, which are now displayed on the Crestron Home App for iOS, Android Mobile, and Crestron touch screens.
• Added support for sharing CEN-GW1 and CENI-GW1 gateways between Crestron Home processors in multi-processor systems.
• Added support for the Crestron Home SIMPL Integration Modules.
• Added support for the DM-NVX-384.
• Enabled the DM-NAX-BTIO-1G to function in receiver mode.
• Added support for Meljac Crestron Connected Keypads.
• Enabled the use of Black Nova keypads with a display for controlling and visualizing thermostat controls
• Important: Requires Black Nova firmware v1.3.2 or later.
• Allowed Crestron Ethernet devices to utilize the Crestron Home Processor static IP address instead of hostname.
• Updated the myCrestron Crestron Home Configurator to support the configuration and deployment of the following devices and features:
• Events, Commands, and Feedback States for lighting and shade devices
• CEN-CI3 and supported cards
• International Keypads:
• C2NI Models
• CLWI Models
• Cresnet third-party Keypads
• C2N-UNI8IO
• CSM-QMTDC-163-X Sheer Shades
• Enhanced the single-room experience user interface: Crestron touch screens set to display only a single room will no longer show media content for hidden rooms.
• Added an intercom tile to the Room pages on the Crestron touch screens.
• Introduced the ability to search for systems on the “My Systems” page of the Crestron Home mobile applications.
• Increased the maximum number of climate scenes from 24 to 200.
• New BACnet features:
• Support for Dry Mode
• Support for setting the “relinquish default” value rather than using the priority array

Bug Fixes and Behavior Changes

• Resolved a touch-sensitivity issue with the volume control slider on Crestron 10-inch touch screens.
• Fixed a problem when controlling CHV-TSTATEX thermostats via the Crestron Home App for systems using processors with firmware versions below 4.0.
• Addressed the issue of lost actions for version 2 Extension Drivers following a reboot of the Crestron Home processor.
• Addressed the issue of lost actions for version 3 Extension Drivers after a Crestron Home processor reboot.
• Resolved an intermittent issue where the Phillips Hue driver might fail to load after a reboot of the Crestron Home processor.
• Fixed the problem of conditional logic steps disappearing in specific scenarios involving Crestron Home processor reboots.
• Corrected the issue where light scene levels would change when importing a child processor into a parent processor.
• Addressed an intermittent issue where a panel-to-panel call could fail, resulting in a single ring.
• Resolved multiple edge cases in panel-to-panel calling that could cause a panel to get stuck on the call screen.
• Fixed the issue where Crestron touch screens would not exit screensaver mode upon receiving a page.
• Fixed the issue of Circadian and Solar Sync scenes becoming invisible in multi-processor systems.
• Fixed the issue causing the Crestron Home Setup to freeze when navigating to the limits or speed tab of an offline shade.
• Fixed the issue on the Crestron Home Setup where Media Zone events would not display correctly if the room had more than four displays.
• Addressed several text overlap issues in the Crestron Home Setup.
• Fixed a problem in the Crestron Home mobile application where user names could be edited to exclude certain characters.
• Removed the DGE-1000 HDMI input from the CEC connection view for drivers, as it is not a supported input.
• Corrected the rendering issue with the remaining time text on Crestron touch screens.
• Resolved the problem of icons not populating correctly in the Crestron Home app when an Autonomic source is routed.
• Fixed an intermittent issue where the Crestron Home app could display the shade icon instead of the light icon after a processor reboot.
• Addressed the flickering of video controls in the Crestron Home app when navigating to the page.
• Resolved an intermittent issue where video controls might not render properly in the Crestron Home app.
• Improved volume control functionality on Crestron touch screens during calls.
• Fixed the issue where occupancy event actions were not imported correctly from the myCrestron Crestron Home Configurator tool.