Crestron Home can now support multiple processor connections for a single system.

CP4-R V1: Please confirm that your processor is a V1 model before loading FW manually. To confirm, connect to the processor via text console in Toolbox and issue the command "ver -v". The model number on the first line will show "CP4-R Cntrl Eng". If wrong file is used there are no side effects, and the Firmware upgrade will fail.

Change Log:

Changes since Last Version

New Features

• Crestron Home can now support multiple processor connections for a single system. This allows for separating lighting devices, including keypads, to their own dedicated processor as well as increasing the maximum number of devices Crestron Home supports. For more details on the capabilities, please reference the Crestron Home manual, https://docs.crestron.com/en-us/8525/Content/Topics/Home.htm
• Adds support for the Crestron TST-1080 wireless touch screen
• Adds support for the next-generation Crestron Horizon keypads and dimmers. Supported models include
• HZ2-DIMUEX
• HZ2-DIMLVEX
• HZ2-DIMEX
• HZ2-SWEX
• HZ2-KPEX
• HZ2-KPCN
• Button programming supports the ability to set colors for feedback with the Horizon V2 product line.
• Horizon V2 keypad backlight programming enhancements
• Adds support to remotely update device firmware on devices connected to the Crestron Home processor via the myCrestron portal
• Adds the ability in Crestron Home to discover devices on network subnets that the control processor is not located. The new capability can be found in the “Ethernet and Wifi” and “Manage Gateways and Processors” section of the Crestron Home setup application

Bug Fixes and Behavior Changes

• Resolved issue with EX thermostats not properly reporting offline status via the end-user application when power was lost to the device
• Temperature settings via the UI can now be modified by 0.5 degrees Celsius when using the DIN- 1TSTAT8
• Fixed TSR-310 issue with loading circle shown after routing audio and video
• Resolved issue with C2N-IO and DIN-8SW8 not discovering within the Crestron Home setup application
• Resolves issue where CLCI-MCEX and CLCI-KPLEX could stop sending feedback to the processor resulting in incorrect feedback on the end-user application
• Resolved issue with Horizon Keypads “Night Active Override” setting not properly retaining its value on reboot
• Fixed keypad programming issue where Master Raise/Lower did not properly control the programmed lighting load
• Resolved issue with discovering CEN-GW1 and CEN-GWEXER after importing a configuration from the myCrestron portal that included serial numbers for these devices
• Fixed issue with Autonomics airplay functionality when grouping via the Crestron Home application
• Resolved Issue with auto update not functioning for the HD-CTL-101
• Resolved issue where zone state changes on the DSC driver were not properly reflecting in the Crestron Home end-user application
• Resolved issue with Wattbox extension not properly functioning when actions are triggered via sequences
• Resolved issue with sequence commands targeting extension drivers not properly functioning
• Resolved UI issue with the TV presets page on iOS devices
• Resolved issue with saving settings when modifying circadian controls in multiple rooms
• Resolved button programming issue for media scenes. Toggle Scene/Off did not properly turn media zones off
• Resolved rare issue when power cycling the DIN-GWDL could cause a processor reboot
• Resolved issue on the mobile applications where the sign out confirmation was not properly appearing