The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Ethernet Ports Fixed; Multiple Known Issues Listed

New Features:

Nothing known

Enhancements:

Nothing known

Fixed Bugs:

  • ✔ Fixed issue with cascaded system configurations enabling disabled ethernet ports at startup. See details

Open Issues:

  • ? With safe cascade off, cascaded blade information may not appear after hot plug.
  • ? XPanel may be stuck on "system is loading" after reboot/power cycle.
  • ? Adobe Air version 32 or later required before XPanel installation.
  • ? Uninstall previous versions of XPanel before new installation to avoid failures.
  • ? Video wall configuration may be lost after power cycle; can be recovered via Crestron SIMPL/C#.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) does not support LAN and Content LAN on the same subnet.
  • ? DM-TX-200-C-2G HID routing may not survive switcher reboot; routes should be re-established post-online.
  • ? DM-RMC-4KZ-SCALER-C vertical bezel compensation does not persist across reboot; set programmatically when desired.
  • ? Sporadic issues with DM-MD16x16/32x32-CPU3(-RPS) when routing to more than 8 DMC-4KZ-HDO outputs.
  • ? Audio Breakaway may delay audio recovery by 15-20 seconds post-reboot.
  • ? Audio double lock may occur when routing to all outputs on DM-MD32x32-CPU3.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) web configuration lacks redundant power supply status.
  • ? Reliability issues with DM-TX-4KZ-302-C using USB-C to DisplayPort adapters.
  • ? TT-100 indicators do not work with USB HID port; use COMPUTER port instead.
  • ? Audio joins don't work for specific DMCI-DMC symbols.
  • ? Double audio lock may occur with certain LG/Samsung Blu-Ray players on upstream switching.
  • ? HDR routed to DMC-4K-HDO may output bad video instead of no video.
  • ? DMC-4K/4KZ-DSP cards do not down-mix DTS:X or Dolby Atmos to PCM 2ch audio.
  • ? Unstable video when DMC-4KZ-HD(-DSP) is connected to certain players.
  • ? Global EDID assignment may report false failures; use batch assignments instead.
  • ? DMC-STR may show a resolution of 0x0@0 for specific IP camera streams.
  • ? Apple keyboard connection reliability issues with RMCs.
  • ? HDMI audio unreliable at 480i with all TXs except TX-401-XX; all other resolutions are fine.
  • ? Support for elapsed seconds and bitrate feedback removed from streaming cards.
  • ? Unsupported audio formats can cause DMC-STR to lock up; use AAC audio.
  • ? Network issues may stop DMC-STR from decoding a stream; restart stream for recovery.

Update Instructions:

Nothing known

Version: 3.03.07 Link
Receive Important Update Messages Stay tuned for upcoming Crestron DM-DA4-4K-C updates

More from the Signalmanagement section

Was the content helpful to you?

Advertisement Advertise here?
Banner Logitech