The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Ethernet Port Issue Resolved, New Known Issues Listed

New Features:

Nothing known

Enhancements:

Nothing known

Fixed Bugs:

  • ✔️ Fixed issue with cascaded system configurations that enabled disabled ethernet ports during startup. See OLH Answer ID 1000914 for more details.

Open Issues:

  • ? With safe cascade off, cascaded blade information may not show after hot plug of the fiber/cable.
  • ? XPanel may become stuck on a "system is loading" screen after reboot or power cycle.
  • ? Adobe Air version 32 or later must be installed before XPanel installation.
  • ? Uninstall previous versions of XPanel before installation from DMPS to avoid installation failure.
  • ? Video wall configuration on DMC-4KZ-HDO cards may be lost after power cycle; recover by resending configuration values.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) does not support connecting LAN and Content LAN ports to the same subnet.
  • ? DM-TX-200-C-2G HID routing may not survive switcher reboot; route should be re-established.
  • ? Vertical bezel compensation value doesn't persist across reboot for DM-RMC-4KZ-SCALER-C; set value programmatically.
  • ? Sporadic issues with outputs when routing same to more than eight DMC-4KZ-HDO outputs.
  • ? DM-MD32x32-CPU3 switcher may take 15-20 seconds longer to recover audio post reboot when Audio Breakaway is enabled.
  • ? Audio double lock may occur when routing to all outputs in DM-MD32x32-CPU3 switcher.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) XPanel configuration tool lacks redundant power supply status.
  • ? DM-TX-4KZ-302-C DisplayPort has reliability issues with USB-C to DisplayPort cables/adapters.
  • ? TT-100 "Connect It" indicators malfunction when connected to USB HID port; use COMPUTER port instead.
  • ? Audio joins like Audio_Format_fb do not work for certain DMCI-DMC cards.
  • ? Double audio lock may happen with certain LG/Samsung Blu-Ray players when switching upstream.
  • ? HDR source on DMC-4K-HDO output card may result in bad video output.
  • ? DMC-4K/4KZ-DSP cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
  • ? DMC-4KZ-HD(-DSP) setup may produce unstable video with certain players when using DM default EDID.
  • ? False failures reported when assigning Global EDID to a fully populated DM-MD32x32 chassis.
  • ? DMC-STR may report 0x0@0 resolution when streaming from certain third-party cameras.
  • ? Apple keyboard connectivity issues with RMCs.
  • ? HDMI audio unreliable for 480i video across all TXs except TX-401-XX.
  • ? Streaming cards have removed support for certain feedback features due to stability issues.
  • ? Unsupported audio formats may cause DMC-STR to lock up; use AAC audio.
  • ? Network issues may cause DMC-STR to stop decoding; restart the stream to recover.

Update Instructions:

Nothing known

Version: 3.03.07 Link
Receive Important Update Messages Stay tuned for upcoming Crestron DM-MD8X8-CPU3 updates

More from the Signalmanagement section

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad