The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

DMC-STR Update: Bug Fixes and Known Issues Overview

New Features:

Nothing known

Enhancements:

  • Fixed issue causing the system to hang during startup.
  • Fixed security vulnerability on the DMC-STR, closing port 5555.

Fixed Bugs:

  • ✔ Fixed issue causing the system to hang during startup.
  • ✔ Fixed security vulnerability on the DMC-STR, closing port 5555.

Open Issues:

  • ? DMC-STR does not upgrade when the unit (8X8/16X16/32X32) is upgraded from 3.02.18 to 3.03.x. See support link for more details.
  • ? Adobe Air version 32 or later must be installed prior to XPanel installation.
  • ? It is recommended to uninstall previous versions of XPanel from Desktop before installing it from DMPS or installation may fail.
  • ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle or switcher reboot.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN port and Content LAN port to the same subnet.
  • ? DM-TX-200-C-2G HID routing may not survive a switcher reboot.
  • ? Vertical bezel compensation value set from the DM Tool doesn't persist across reboot for DM-RMC-4KZ-SCALER-C.
  • ? When routing same input to more than 8 DMC-4KZ-HDO outputs, sporadically some outputs don't have freeze-frame switching.
  • ? When Audio Breakaway is enabled, DM-MD32x32-CPU3 switcher may take additional time for audio recovery.
  • ? Routing an input to all outputs in DM-MD32x32-CPU3 may observe audio double lock during switching.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) web-based XPanel configuration tool doesn’t show redundant power supply status.
  • ? DM-TX-4KZ-302-C DisplayPort input doesn't work reliably with USB-C to DisplayPort cables and adapters.
  • ? TT-100 "Connect It" indicators don't work when connected to USB HID port of the DM-TX-4KZ-302/202-C.
  • ? Audio_Format_fb, Audio_Channel_fb and Audio_Sampling_Freq_fb joins don't work for certain DMCI symbols.
  • ? 4K/4KZ outputs may encounter double audio lock with specific Blu-Ray players.
  • ? When HDR source is routed to DMC-4K-HDO, it may output bad video for certain I/O signal video resolutions.
  • ? DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
  • ? EDID assignment via DM Tool to fully populated DM-MD32x32 chassis may report false failures.
  • ? The DMC-STR may report a resolution of 0x0@0 when streaming from certain third-party IP cameras.
  • ? Apple keyboard does not connect reliably to RMCs.
  • ? All TXs (except TX-401-XX): HDMI audio is unreliable with 480i video.
  • ? On streaming cards, support for elapsed seconds, bitrate, and initiator feedbacks have been removed.
  • ? Streaming unsupported audio formats (e.g., G.711) can cause the DMC-STR to lock up.
  • ? Network problems can cause the DMC-STR to stop decoding a stream; stop and restart to recover.

Update instructions

Nothing known

Update Instructions:

Version: 3.03.11 Link
Receive Important Update Messages Stay tuned for upcoming Crestron DM-RMC-200-C updates

More from the Signalmanagement section

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad