The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

DMC-STR Update Resolves Startup Issues and Security Vulnerability

New Features:

Nothing known

Enhancements:

  • Fixed security vulnerability on the DMC-STR, closing port 5555.

Fixed Bugs:

  • Fixed issue causing the system to hang during startup.
  • Endpoints dropping offline issue resolved.

Open Issues:

  • ? DMC-STR does not upgrade from 3.02.18 to 3.03.x; see support link for details.
  • ? Adobe Air version 32 or later must be installed prior to XPanel installation.
  • ? Uninstall previous versions of XPanel from Desktop before reinstalling; otherwise, installation may fail.
  • ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle; configuration values need to be resent after chassis restart.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN and Content LAN ports to the same subnet.
  • ? DM-TX-200-C-2G HID routing may not survive a switcher reboot; routes need re-establishment post-online.
  • ? Vertical bezel compensation value set from DM Tool doesn't persist after reboot for DM-RMC-4KZ-SCALER-C.
  • ? When routing the same input to more than 8 DMC-4KZ-HDO outputs, outputs may sporadically miss freeze-frame switching.
  • ? DM-MD32x32-CPU3 switcher may take an additional 15-20 seconds for audio recovery when Audio Breakaway is enabled.
  • ? Routing an input to all outputs in DM-MD32x32-CPU3 may observe audio double lock during switching.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) web-based XPanel configuration tool lacks redundant power supply status.
  • ? DM-TX-4KZ-302-C DisplayPort input is unreliable with USB-C to DisplayPort adapters.
  • ? TT-100 "Connect It" indicators do not work when connected to the USB HID port; use the COMPUTER port instead.
  • ? Various audio join issues with DMCI-DMC-4KZ cards and switching problems with 4K outputs.
  • ? DMC-4K-HDO output cards may exhibit bad video when HDR source is routed.
  • ? DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio.
  • ? Global EDID assignment issues when fully populating DM-MD32x32 chassis; assign in batches.
  • ? The DMC-STR may report a resolution of 0x0@0 when streaming from certain IP cameras.
  • ? Apple keyboard connection issues with RMCs.
  • ? HDMI audio is unreliable with 480i video on all TXs except TX-401-XX.
  • ? On streaming cards, support for elapsed seconds, bitrate, and initiator feedbacks removed for stability.
  • ? Streaming unsupported audio formats (e.g., G.711) can cause the DMC-STR to lock up; use AAC audio instead.
  • ? Network problems may cause DMC-STR to stop decoding; restart the stream to recover.

Update instructions

Nothing known

Update Instructions:

Version: 3.03.11 Link
Receive Important Update Messages Stay tuned for upcoming Crestron DM-RMC-4K-100-C-1G-B-T updates

More from the Signalmanagement section

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad