System Update: Fixes and Known Issues for DMC-STR

New Features:

Nothing known

Enhancements:

• Fixed security vulnerability on the DMC-STR, closing port 5555.

Fixed Bugs:

• ✔ Fixed issue causing the system to hang during startup.
• ✔ Fixed issue that caused some endpoints to drop offline.

Open Issues:

• ? DMC-STR does not upgrade when the unit (8X8/16X16/32X32) is upgraded from 3.02.18 to 3.03.x. See link for details.
• ? Adobe Air version 32 or later must be installed prior to XPanel installation.
• ? It is recommended to uninstall previous versions of XPanel from Desktop before installation to avoid failure.
• ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle or switcher reboot.
• ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN port and Content LAN port to the same subnet.
• ? DM-TX-200-C-2G HID routing may not survive a switcher reboot and requires re-establishment.
• ? Vertical bezel compensation value set from the DM Tool doesn't persist across reboot for DM-RMC-4KZ-SCALER-C.
• ? When routing the same input to more than 8 DMC-4KZ-HDO outputs, some outputs may not have freeze-frame switching.
• ? Audio Breakaway may delay audio recovery by 15-20 seconds post-reboot on DM-MD32x32-CPU3.
• ? Routing an input to all outputs in DM-MD32x32-CPU3 switcher may cause audio double lock during switching.
• ? DM-MD8x8/16x16/32x32-CPU3(-RPS) web configuration tool lacks redundant power supply status.
• ? DM-TX-4KZ-302-C DisplayPort input may not work reliably with USB-C to DisplayPort adapters.
• ? TT-100 "Connect It" indicators may not function when connected to USB HID port.
• ? Audio_Format_fb, Audio_Channel_fb, and Audio_Sampling_Freq_fb joins have issues for DMCI-DMC-4KZ-C/-DSP.
• ? Double audio lock may occur with certain LG/Samsung Blu-Ray players during upstream switching.
• ? HDR source routing may lead to bad video output on DMC-4K-HDO output card.
• ? DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
• ? DMC-4KZ-HD(-DSP) may produce unstable video when connected to certain devices.
• ? Assigning Global EDID may report false failures on fully populated DM-MD32x32 chassis.
• ? DMC-STR may report resolution of 0x0@0 when streaming from specific third-party IP cameras.
• ? Apple keyboard connectivity issues with RMCs.
• ? HDMI audio may be unreliable with 480i video on all TXs (except TX-401-XX).
• ? Streaming cards may lack support for elapsed seconds and bitrate feedbacks to stabilize Crestron Toolbox™.
• ? Unsupported audio formats can cause DMC-STR to lock up; use AAC audio.
• ? Network issues may lead to DMC-STR stopping stream decoding; restart the stream to recover.

Update Instructions:

Nothing known