The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

DMC-STR Update: Fixes and Known Issues

New Features:

Nothing known

Enhancements:

  • Fixed security vulnerability on the DMC-STR, closing port 5555.

Fixed Bugs:

  • ✔ Fixed issue causing the system to hang during startup and dropping some endpoints offline.

Open Issues:

  • ? DMC-STR does not upgrade when the unit (8X8/16X16/32X32) is upgraded from 3.02.18 to 3.03.x. See support link for details.
  • ? Adobe Air version 32 or later must be installed prior to XPanel installation.
  • ? It is recommended to uninstall previous versions of XPanel from Desktop before installation.
  • ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle; recover by resending config values from Crestron SIMPL/C# program.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN port and Content LAN port to the same subnet.
  • ? DM-TX-200-C-2G HID routing may not survive a switcher reboot.
  • ? Vertical bezel compensation from the DM Tool doesn't persist across reboots for DM-RMC-4KZ-SCALER-C.
  • ? Switching the same input to over 8 DMC-4KZ-HDO outputs in DM-MD16x16/32x32-CPU3(-RPS) may lead to sporadic freeze-frame issues.
  • ? When Audio Breakaway is enabled, DM-MD32x32-CPU3 switcher may take an additional 15-20 seconds for audio recovery.
  • ? Routing inputs to all outputs in DM-MD32x32-CPU3 may observe audio double lock during switching.
  • ? XPanel configuration tool lacks redundant power supply status for DM-MD8x8/16x16/32x32-CPU3(-RPS).
  • ? DM-TX-4KZ-302-C DisplayPort input has reliability issues with USB-C to DisplayPort cables/adapters.
  • ? TT-100 "Connect It" indicators fail when using USB HID port of DM-TX-4KZ-302/202-C; use COMPUTER port instead.
  • ? Audio_Format_fb, Audio_Channel_fb and Audio_Sampling_Freq_fb joins don’t work for DMCI-DMC-4KZ-C/-DSP and DMCI-DMC-4KZ-HD/-DSP symbols.
  • ? Upstream switching of 4K/4KZ outputs may encounter double audio lock with certain LG/Samsung Blu-Ray players.
  • ? HDR sources routed to DMC-4K-HDO output card may output bad video under certain resolutions.
  • ? DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
  • ? DM-MD32x32 chassis may report false failures when assigning Global EDID; assign input EDIDs in batches of 16.
  • ? DMC-STR may report a resolution of 0x0@0 when streaming from third-party IP cameras.
  • ? Apple keyboard connection issues with RMCs.
  • ? All TXs (except TX-401-XX): HDMI audio unreliable with 480i video.
  • ? On streaming cards, support for elapsed seconds, bitrate, and initiator feedbacks has been removed.
  • ? Streaming unsupported audio formats (e.g., G.711) can cause DMC-STR to lock up; use AAC audio.
  • ? Network problems may cause DMC-STR to stop decoding a stream.

Update Instructions:

Nothing known

Version: 3.03.11 Link
Receive Important Update Messages Stay tuned for upcoming Crestron DM-RMC-SCALER-C updates

More from the Signalmanagement section

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad