System Update Resolves Key Bugs and Known Issues

New Features:

Nothing known

Enhancements:

• Security update: Fixed vulnerability on the DMC-STR, closing port 5555.

Fixed Bugs:

• ✔️ Fixed issue causing the system to hang during startup and causing some endpoints to drop offline.

Open Issues:

• ? DMC-STR does not upgrade when the unit (8X8/16X16/32X32) is upgraded from 3.02.18 to 3.03.x. More details here.
• ? Adobe Air version 32 or later must be installed prior to XPanel installation.
• ? It is recommended to uninstall previous versions of XPanel from Desktop before installing it from DMPS or installation may fail.
• ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle or switcher reboot; recover by resending configuration values from Crestron SIMPL/C# program after a restart.
• ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN port and Content LAN port to the same subnet.
• ? DM-TX-200-C-2G HID routing may not survive a switcher reboot, requiring re-establishment after the endpoint is online.
• ? Vertical bezel compensation value from DM Tool doesn't persist across reboot for DM-RMC-4KZ-SCALER-C.
• ? When routing the same input to more than 8 DMC-4KZ-HDO outputs, some outputs may sporadically not have freeze-frame switching.
• ? Audio Breakaway enabled may delay audio recovery by 15-20 seconds compared to video post reboot on DM-MD32x32-CPU3 switcher.
• ? Routing an input to all outputs in DM-MD32x32-CPU3 switcher may observe audio double lock during switching on outputs.
• ? DM-MD8x8/16x16/32x32-CPU3(-RPS) web-based XPanel configuration tool lacks redundant power supply status.
• ? DM-TX-4KZ-302-C DisplayPort input may not work reliably with USB-C to DisplayPort adapters.
• ? TT-100 "Connect It" indicators don’t work when connected to USB HID port; use COMPUTER port instead.
• ? Audio_Format_fb, Audio_Channel_fb and Audio_Sampling_Freq_fb joins don't function for DMCI-DMC-4KZ-C/-DSP and DMCI-DMC-4KZ-HD/-DSP symbols.
• ? Upstream switching may result in double audio lock on 4K/4KZ outputs with LG/Samsung Blu-Ray players.
• ? HDR inputs routed to DMC-4K-HDO outputs may output poor video depending on resolution; DMC-4K-HDO does not support HDR.
• ? DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
• ? DMC-4KZ-HD(-DSP) input cards with DM default 4k 60Hz 2CH/HBR EDID may produce unstable video when connected to certain players.
• ? Assigning Global EDID via DM Tool to fully populated DM-MD32x32 chassis may report false failures; assign input EDIDs in batches.
• ? DMC-STR may report 0x0@0 resolution when streaming from third-party IP cameras.
• ? Apple keyboards may not connect reliably to RMCs.
• ? HDMI audio may be unreliable with 480i video on all TXs except TX-401-XX.
• ? Streaming cards removed support for elapsed seconds, bitrate, and initiator feedbacks to improve Crestron ToolboxTM stability.
• ? Streaming unsupported audio formats (e.g., G.711) can cause the DMC-STR to lock up; use AAC audio.
• ? Network problems may stop the DMC-STR from decoding a stream; stop and restart the stream to recover.

Update Instructions:

Nothing known