Software Update: Connectivity Product Fixes and Known Issues

New Features:

Nothing known

Enhancements:

Nothing known

Fixed Bugs:

• ✔ ️ Fixed an issue causing the system to hang during startup, leading to endpoint drops.
• ✔ ️ Fixed security vulnerability on the DMC-STR by closing port 5555.

Open Issues:

• ? DMC-STR does not upgrade when the unit is upgraded from 3.02.18 to 3.03.x. See here for more details.
• ? Adobe Air version 32 or later must be installed prior to XPanel installation.
• ? It is recommended to uninstall previous versions of XPanel from Desktop before installation to avoid failures.
• ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle.
• ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN port and Content LAN port to the same subnet.
• ? DM-TX-200-C-2G HID routing may not survive a switcher reboot.
• ? Vertical bezel compensation value set from the DM Tool doesn't persist across reboot for DM-RMC-4KZ-SCALER-C.
• ? When routing to more than 8 DMC-4KZ-HDO outputs, sporadically some outputs may not have freeze-frame switching.
• ? When Audio Breakaway is enabled, DM-MD32x32-CPU3 switcher may take longer for audio recovery.
• ? Routing an input to all outputs in DM-MD32x32-CPU3 switcher may observe audio double lock during switching.
• ? DM-MD8x8/16x16/32x32-CPU3(-RPS) web-based XPanel configuration tool lacks redundant power supply status.
• ? DM-TX-4KZ-302-C DisplayPort input doesn't work reliably with USB-C to DisplayPort cables.
• ? TT-100 "Connect It" indicators don't work when connected to USB HID port.
• ? Audio joins for DMCI-DMC-4KZ-C/-DSP don't function properly.
• ? When switching upstream, 4K/4KZ outputs may have double audio lock with specific Blu-Ray players.
• ? When HDR source is routed to DMC-4K-HDO output, it may output bad video instead of no video.
• ? DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM.
• ? DM-MD32x32 chassis may report false failures when assigning Global EDID.
• ? The DMC-STR may report a resolution of 0x0@0 when streaming from certain IP cameras.
• ? Apple keyboard does not connect reliably to RMCs.
• ? HDMI audio is unreliable at 480i video for all TXs (except TX-401-XX).
• ? On streaming cards, support for elapsed seconds, bitrate, and initiator feedbacks have been removed.
• ? Streaming unsupported audio formats can cause the DMC-STR to lock up; use AAC audio.
• ? Network problems can cause the DMC-STR to stop decoding a stream; restarting resolves this.

Update instructions

Nothing known

Update Instructions: