The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Connectivity Update Resolves Critical Issues and Known Concerns

New Features:

Nothing known

Enhancements:

  • Resolved issue causing the system to hang during startup.
  • Fixed security vulnerability on the DMC-STR by closing port 5555.

Fixed Bugs:

  • ✔ Fixed issue causing the system to hang during startup and causing some endpoints to drop offline.
  • ✔ Fixed security vulnerability on the DMC-STR, closing port 5555.

Open Issues:

  • ? DMC-STR does not upgrade when the unit (8X8/16X16/32X32) is upgraded from 3.02.18 to 3.03.x. See support link for details.
  • ? Adobe Air version 32 or later must be installed prior to XPanel installation.
  • ? It is recommended to uninstall previous versions of XPanel from Desktop before installing it from DMPS or installation may fail.
  • ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle or switcher reboot.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN port and Content LAN port to the same subnet.
  • ? DM-TX-200-C-2G HID routing may not survive a switcher reboot.
  • ? Vertical bezel compensation value set from the DM Tool doesn't persist across reboot for DM-RMC-4KZ-SCALER-C.
  • ? When routing same input to more than 8 DMC-4KZ-HDO outputs, sporadically some outputs don't have freeze-frame switching.
  • ? When Audio Breakaway is enabled, DM-MD32x32-CPU3 switcher may take additional time for audio recovery.
  • ? Audio triple lock may occur when routing an input to all outputs in DM-MD32x32-CPU3 switcher.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) web-based XPanel configuration tool lacks redundant power supply status.
  • ? DM-TX-4KZ-302-C DisplayPort input exhibits reliability issues with USB-C to DisplayPort cables.
  • ? TT-100 "Connect It" indicators malfunction when connected to USB HID port of the DM-TX-4KZ-302/202-C.
  • ? Audio_Format_fb, Audio_Channel_fb and Audio_Sampling_Freq_fb joins don't work for DMCI-DMC-4KZ-C/-DSP and DMCI-DMC-4KZ-HD/-DSP symbols.
  • ? Issues with 4K/4KZ outputs leading to audio lock occur with specific Blu-Ray players.
  • ? DMC-4K-HDO output cards may output bad video when HDR source is routed.
  • ? DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
  • ? Global EDID assignment to DM-MD32x32 chassis may report false failures; assign input EDIDs in batches.
  • ? DMC-STR may report resolution of 0x0@0 when streaming from certain third-party IP cameras.
  • ? Apple keyboard connecting issues with RMCs.
  • ? HDMI audio unreliable with 480i video across all TXs except TX-401-XX.
  • ? Streaming cards have removed support for certain feedbacks due to stability issues.
  • ? Unsupported audio formats can cause the DMC-STR to lock up; use AAC audio.
  • ? Network problems may cause the DMC-STR to stop decoding streams.

Update Instructions:

Nothing known

Version: 3.03.11 Link
Receive Important Update Messages Stay tuned for upcoming Crestron DM-TX-201-S2 updates

More from the Signalmanagement section

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad