Optimizations plus support for new features, functions, and hardware

Improvement(s)

? Adds support for DM-NAX-16AIN

? Adds support for importing Cresnet to Ethernet bridges from Crestron Home Configurator

? Adds support for importing Ceiling Fan keypad actions from Crestron Home Configurator

? Adds support on TSW, iOS, and Android to show Pools on the Home screen

✔ ️ Adds support for DSC Power Series Neo security systems

✔ ️ Will now display the serial number of devices, if entered via the Crestron Home Configurator

✔ ️Adds support for Keypad Control Station data if pre-configured via Crestron Home

✔ ️ Adds protection for a potential lockup that could occur if a Texecom Premier Elite 48 security system was in the system

✔ ️Adds protection from certain invalid drivers that could stop the system from starting

✔ ️Adds optimizations to the Source Routes step that are more visible in larger systems

✔ ️On NAX systems allows the startup volume to be set higher than 50%

✔ ️ Adds self-healing to recover if a DIN-DALI stops communicating with the processor

✔ ️ Allows side-loading of drivers even if the driver version on the portal is newer

✔ ️ Adds DM-NAX support for fast forward and rewind on Podcasts

Resolved Issue(s)

✔ ️Fixes a potential exception that could occur when calling UpdatePairedDevice on platform drivers

✔ ️ Fixes a potential exception that could occur unloading platform drivers

✔ ️Corrects issue where in some rare cases EX devices could be unacquired from the MC4-R after a firmware upgrade in some cases

✔ ️Corrects issue observed on Satel security systems related to the friendly names not updating automatically on the user interface

✔ ️Corrects issue where NVX E10/E20/D10/D20 are not displaying on the device firmware page

✔ ️ Corrects issue where profiles may not update in the Crestron Home UI after making changes at the DM-NAX webpage

✔ ️Corrects potential lockup caused by underlying cresnet issue. If seeing, "Timed out while waiting for cresnet driver to indicate operation done" in the console, this version recovers from those situations.

✔ ️Corrects potential issue that can cause the UI to no longer display mode, setpoint, or schedule, on cresnet thermostats after a power loss, or cresnet loss

✔ ️Corrects issue where Autonomic devices were not paused after an audio zone is powered off

✔ ️Corrects issue where treble was not adjustable from AV Switchers

✔ ️Corrects potential scenario where HZ-THSTAT could switch from cool and off modes when adding the device to a system

✔ ️Corrects issue where duplicate cresnet devices could be shown in the discovered device list when C2N-AMP-4x100, C2N-IO, GLS-SIM, CNX-PAD8A, CNX-BIPAD8, CNAMPX-12x60, CNAMPX16x60, or CNX-PAD8As are in the system

✔ ️Protects against potential lockup while controlling lights, or shades, during scene setup

✔ ️Corrects issue where an EX device may display on the wrong gateway after doing a device replace