ElmoL-12W
<1K views
Document camera via USB?
Why does the picture freeze when I use the camera via USB? I have to go to menu and back to the camera. After that it works again.
ElmoL-12W
Answers
Top answer
There are several reasons why the Elmo L-12W camera image might freeze over USB. Here are some possible causes and solutions:
- if the camera gets too hot, it may cause the image to freeze. Make sure the camera is well ventilated and that there are no heat sources nearby.
Check the USB connection between the camera and the computer. Make sure that the cable is firmly connected and that there is no interference on the USB line. 3.
Make sure that the latest drivers for the camera are installed. Also check if there are any conflicts with other installed drivers that could cause the image to freeze.
Check the software you are using to use the camera. Make sure it is compatible with the camera and that all settings are correct.
If the cause still persists, there is most likely a hardware defect. In this case, I recommend contacting the manufacturer.
You know a better answer?
The question about Elmo L-12W has already been answered, but there may be a better solution or alternative available by now. If you know it, answer the question now and increase your reputation as an industry expert in our B2B community.
Related Questions
Why Elmo L12 W can no longer be switched on - what can I do?
Recently the Elmo can no longer be switched on, is there a way to reset the device or can you possibly help me where the...
Image Mate 4 and Teams - Image Mate 4 window flashes?
When I start the Elmo L-12W in the Image Mate 4 window and connect to Teams, the Image Mate 4 window starts flashing. About once...
Stay up to date on Elmo L-12W
Was the content helpful to you?
