LogitechI have 4 Mic Pods daisy chained together and connected to a mic pod hub. The table hub cant discover any of the mic pods, and the hub keeps disconnecting and reconnecting. Same issue with two seperate hubs, and disconnecting the mic pods from the hub changes nothing.
Have you run Sync to make sure all is up to date?
Is the cable between the Display Hub and Table Hub good and not too long? I think max is 10m
https://prosupport.logi.com/hc/en-us/articles/360040084853
Do the mics work ok daisy chained when connected directly to the Table Hub no Mic Hub?
If they do, connect the Mic Hub and add one Mic at time to see how many are recognised; there seems to be some holes in the documentation, the Mic Hub either does or doesn't support daisy chained mics and if it does it only supports 2 in the chain
You know a better answer?
The question about Logitech Rally Plus has already been answered, but there may be a better solution or alternative available by now. If you know it, answer the question now and increase your reputation as an industry expert in our B2B community.
Related QuestionsWhy static noise in rally systems?
I have a problem with my Rally system running on a NUC with Microsoft Team Rooms. I hear a static noise when the system is...
Rally Plus table hub or display hub sporadically become unresponsive. How to prevent and fix?
Hi, we have installed two Rally Plus systems (only difference: one with 4, the other with 7 Mic Pods). They are running for one month...
Why Rally Mics are emitting heat signal?
There is a finding where when MTR end up a call on Teams the mics stay active. Checking with Microphone they said to check with...
Stay up to date on Logitech Rally Plus
Was the content helpful to you?
