Not a user yet?
Log in Register for free Suggest a product
DE | EN
Rally PlusLogitech
Rally Plus
8.4K views

Nothing coming on second display?

We purchased rally plus system yesterday and wired as per the diagram.

1. Connected the HDMI port of my PC to Table hub.

2. Connected the USB cable from PC to table hub.

3. Connected the Mics to Table hub.

4. Connected Speakers to Speaker connection points of display hub.

5. Connected hdmi 1 of display hub to first TV.

6. Connected Hdmi 2 of display hub to second TV.

7. Connected CAT6A cable between display hub and table hub.

8. Connected camera to display hub.

9. Connected power to both display and table hubs.

After switch on the display is fine in first TV connected in the hdmi 1 port of display hub but nothing on second TV. Then i interchanged the hdmi cables connected to the display hub. Then display coming on second tv only which means again no display coming from hdmi2 port.

Then i connected the hdmi cable from PC to hdmi 2 port of table hub. Then i tried all the above steps but nothing coming on two TVs.

Since my pc doesn't have 2 hdmi ports, i tried with hdmi splitter. Connected the PC output to splitter . The two hdmi outputs of the splitter to two hdmi ports of table hub. Then also the display is only coming to the tv connected to the hdmi port 1 of display hub. Could you please anything wrong with my connection?

Thank you

Rajesh. V

rajv
rajv / newcomer (8)
 

Answers

Top answer

Connect the first display to the Intel Nuc. For the second display use a USB-C to HDMI cable. Then it works.

The following should be noted for the HDMI route: This works with either 2x HD or 1x 4K resolution. Otherwise the picture remains black as described.

For a dual-screen solution, it is best to connect the PC directly to the displays or use only one HDMI port on the hubs and lay a parallel line (HDMI / HDBaseT).

See also here.

Hello together. Question what is the use of the second HDMI output? the Microsoft Teams meeting, for example, takes place only on one display. Do you have the possibility during a meeting on the screen 2 to show a slide and on the other the meeting participants?

matischo
matischo / newcomer (28)
 

You know a better answer?

The question about Logitech Rally Plus has already been answered, but there may be a better solution or alternative available by now. If you know it, answer the question now and increase your reputation as an industry expert in our B2B community.

To the product All questions

Related Questions Related Questions

Why static noise in rally systems?

I have a problem with my Rally system running on a NUC with Microsoft Team Rooms. I hear a static noise when the system is...

1 Read answer

Rally Plus table hub or display hub sporadically become unresponsive. How to prevent and fix?

Hi, we have installed two Rally Plus systems (only difference: one with 4, the other with 7 Mic Pods). They are running for one month...

5 Read answers

kiril
kiril
 

Why Rally Mics are emitting heat signal?

There is a finding where when MTR end up a call on Teams the mics stay active. Checking with Microphone they said to check with...

1 Read answer

Receive Important Update Messages Stay up to date on Logitech Rally Plus

Was the content helpful to you?

Advertisement Advertise here?
Banner Logitech