Display Intercommunication ID next to Intercommunication caption in periphery tree
New
- M-Bus Extension
- BG-I26526 Expand childs of memory flag when selecting memory flag
- Display Intercommunication ID next to Intercommunication caption in periphery tree
- Nano Dimmer (US)
- A3D9-T1029 Energy Flow Monitor: Provide statistic for rest
- Wallbox Manager
- Distribute available power to multiple Wallboxes
- A3D9-T997 Simplification of math blocks: now all connections are considered for calculation in add, multiply, minmax and average operations
- previously only the last changed value was used when an input had multiple connections
- DALI data preparation changed for DALI Air support
- DALI Air
- Push Notifications: Support for new handling on iOS and Android devices
- Separate permission to allow a user to trigger a Miniserver backup
- Wallbox
- Priority input (when used in combination with a Wallbox Manager) no behaves like the Enable charging input
- Attention: This may change behaviour if you have already used the Prio input!
- Priority charging is started with a short pulse (<1s)
- When the pulse is longer then 1s charging is stopped again with the falling edge
- Current mode output ‘M’ is now also available when managed by a Wallbox Manager
- 0 = Charging not allowed
- 1 = Eco charging allowed
- 2 = Priority charging allowed
- Access NFC Code Touch
- Output Uidla now uses username as fallback when no User ID is set
- XF1-T8 Add Support for XAL Lamp
- Managed Tablets
- Pair your wall mounted tablet with your Miniserver
- No need to remember login credentials
- Function Block support
- Activate screen
- Do not disturb
- Screen brightness
- Battery Level
- Configure Ambient Mode in Loxone Config
- A3D9-T1087 Added Miniserver-Healthcheck
- Checks basic functionality like Network, Timeserver, CPU/Memory/SD-Usage
Fixed
General
- BG-I26469 Recovery of communication loss
- BG-I26492 Schedule-Dialog: no colour-info for access schedule
- BG-I26317 Sequence Controller Return statement is ignored when opening dialog during simulation
- BG-I26497 Text of merged object not updated in tree when dragged to page
- BG-I26295 Mouse position is offsetted when a banner is displayed
- BG-I26009 Update may fail
- BG-I26192 Statistic deletion interval of meters of a power supply & backup is reset when loading from Miniserver
- BG-I23901 HomeConnect update states after device was offline
- BG-I26285 Mouse wheel scrolling changes selected ribbon while another dialog is opened
- BG-I26325 Memory flag inputs don’t have automatically the colour of the output
- BG-I26398 Miniserver deletion from client search dialog breaks project
- BG-I26410 Usergroups not updated after a trust user is transferred
- BG-I26403 Exporting client project creates unusable memory flags for connection references
- BG-I26424 Objects not showing central info when used in Door and Window Monitor
- BG-I26418 Internal tree of Miniserver tree not usable
- BG-I25615 NFC function block shows a strange output name when deleting name of connected output in GUI
- BG-I24914 NFC Code Touch does not react on off input
- BG-I24106 Access denied now shows in the Config “Code …” or “NFC …”, also the user is shown if available
- BG-I24267 Door and Window Monitor Fixed NOT function block filtering description of connected input
- BG-I24873 Confirming burglar alarm configuration dialog sets program status to not identical
- BG-I26124 Text for deactivated codes in the overview of authentication attributes
- BG-I26202 Gate Controller: API connector not at last position
- BG-I26221 Sequence Controller: tabulators in set commands are removed
- BG-I26272 AC Control: Common devicetype shown when learned in with app
- BG-I25589 Automatic designer: mode-names different to documentation
- BG-I26386 Update Italian Calendar names
- BG-I26417 Presence Control: output Pc not resetted with “off”
- BG-I26370 Window: after Wp input Pc and Po no longer works continuous pulse
- BG-I23136 Touch and Grill T5 missing from Room 2
- BG-I26244 PLK calendar: typo fixed
- BG-I26176 Virtual output does not automatically adapt type (analog/digital) after being connected
- BG-I26142 Update of clients on a Gen.1 gateway fails due to less memory
- BG-I26270 App Learning: Tree to Air Bridge re-appears in search results after creation
- BG-I26291 Link caption displays wrong device count
- BG-I26179 Default user right automatically gets re-added
- BG-I26295 Page Banner overlay overlaps function blocks
- A3D9-T649 added switchboard and installation location columns to diagnostic views
- BG-I26119 closing a device diagnostic dialog didn’t stop the running diagnoses in all cases
- A3D9-T557 view settings are now stored and reloaded for all compatible dialogs (device diagnostics, device learning, …)
- Webengine view unable to load fonts from local resources (e.g. MessageCenter)
- ProjectManagement view had incorrect font applied
- centering of widgets/windows in parent didn’t work correctly in all cases
- BG-I22968 updated Husqvarna Plugin v1.0.7
- more logging
- fixed potential auth issues
- BG-I26067 Edit Settings dialog: visual identification context menu for unsupported devices
- BG-I26011 Rooms from client not visible in user management
- BG-I26117 Invalid page selection after closing search dialog
- BG-I25946 No Color-Info for digital schedule
- BG-I26140 Repair visibility of internal Air/Tree-IO’s
- BG-I21204 Automatic Scene: invalid scene after adding project as client
- BG-I24750 Intercommunication output send wrong value after SPS restart (may happen on client gateway systems)
- BG-I26055 1-Wire last received timestamp not remanent
- BG-I26024 Miniserver keeps coloured background in periphery tree after removing client object
- BG-I26159 Caller not sent when text is too long
- BG-I26204 HunterDouglas cant be added
- BG-I26192 Statistic deletion interval of meters of a power supply & backup cant be set
- BG-I25266 App Learning: No proper error in app when device is unable to be paired on a client
- BG-I26219 Page tabs not updated after load from Miniserver
- BG-I26189 Config connection via remote connect fails due to timeout
- WA1-T426 Wallbox Air/Tree: Add systemmessage for supply voltage drop
- BG-I26656 Access Keypad: auto connect UidLa to Uid of Wallbox
- BG-I26381 opening air diagnostic dialog now only shows single route if air device is selected in document tree
- Some device learning dialogs didn’t set modified flag when unlearning a device
- BG-I18876 limiting data in GenericView to not grow infinitely and keep filtering performance up
- BG-I26021 raising device diagnostic windows when showing warning that a device diagnostic is already running
- BG-I25712 Intercommunication device wasn’t resolved correctly in UDP monitor for incoming packages
- BG-I26523 tree branch in Tree learning dialog was named “right” for single internal branches
- BG-I25530 improved key navigation directly from search input to table view in MyProjects view
- BG-I26449 it is possible to delete Dali “Gruppe”
- BG-I26572 Description of objects not used for reference drawing
- BG-I25853 Touch Pure Flex: Degree sign takes up two characters
- BG-I26530 App Learning: Devices don’t identify audible
- BG-I26674 Login to Miniserver fails when previously connected to a Miniserver with same address
- Wallbox and AC Control configuration dialog have untranslatable texts
- Wallbox User not reset when charging is ended
- BG-I26618 Air Base Channel Free Input does not have correct name
- BG-I26591 LiveView can’t be stopped when ribbon is minimised
- BG-I26703 PicoC Editor shows wrong string highlighting
- BG-I26689 Connector window pops up when changing page while connection referencing
- BG-I26509 Passwords to Miniservers now not contained anymore in files saved to Multiplicator Miniservers
- BG-I25852 Touch Pure Flex: Allow asterisk in display text
- BG-I26615 Status: comparing text with analogue values was not working properly
- Object intercommunication fails after a power outage (Miniserver starts faster than the network)
- BG-I26942 Frequency counter on digital input of Miniserver causes incorrect edges which causes incorrect values on metering function blocks
- BG-I26522 Alarm History does not use description of alarm trigger instead name is always usedBG-I27011 Drag and drop of device causes visual glitches while doing auto connection
- BG-I25582 Burglar Alarm: Confirming alarm resets window states set from parameter ‘Aoc’ which triggers alarm again
- BG-I23915 Visualization shows data of last hour in the app in the first minutes after the full hour
- Grill Thermometer shows offline error message even if online state is not monitored
- Text Generator: Missing documentation textsBG-I26612 Climate controller dialog: change in prohibition settings changes settings on room controllers
- BG-I26298 User management: user cannot be added to a group if the same group-uuid was imported from trust member
- BG-I26952 Text generator: improved search for userid for trusted users
- Belimo configure dialog: cursor jumps while verifying input
- BG-I26317 Closing sequence dialog during running simulation stops sequence execution
- BG-I23563 Alarm Central: disarm command unlocks Burglar Alarm Control
- Freshly inserted Schedule objects now only contain Monday till Sunday operating modes per default
- BG-I26670 Value correction could show -0 in some instances
- BG-I26918 Wallbox missing when creating partlistBG-I26795 Invalid configured virtual output commands not working anymore
- BG-I26718 Toilet Ventilation Controller: Doesn’t turn off again after a save to Miniserver
- BG-I26784 Linked controls not shown in app
- BG-I26868 Project Backups window renamed close buttonBG-I26762 EFM: Missing states after auto update (visualization not working)
- BG-I26763 HTTP client didn’t return error to caller properly in all cases
- BG-I26807 fixed possible value overflow when resetting values in Tree/Link diagnostics view
- BG-I27191 Smoke & Water alarm: Texts do not use description of alarm trigger instead name is always used
- BG-I27192 SD Test fills Miniserver SD card
- BG-I27192 No error message when trying to update Miniserver but SD card is full
- BG-I27109 SD Format: Better button texts for message box
- BG-I27202 Warning message when saving new project to Miniserver is confusing
- BG-I27114 Adding client project may create an invalid project
- BG-I27223 Air learning: Removed deprecated IP column & time column is empty
- BG-I26661 Memory flag shows invalid value in visualization
- BG-I26946 Import Users: importing users with duplicate user-id possible
- BG-I26973 Periphery Tree: duplicate Touch & Grill references
- Text generator does not handle UserID fallback to username which is used by the NFC access
- Allow more information for virtual http input
- NFC Key and ID not in documentation
- BG-I27175 Network search does not show actual type of found Miniservers
- DALI AIR DALI search dialog bugfix
- fixed DALI extension configuration data
Devices & Extensions
- Air updates:
- Fixed CRC error packets appearing 24 times in a row (Air monitor)
- Broadcast update verification is now done separately to improve reliability and reduce traffic
- Monitor packets for Air updates are now more descriptive
- BG-I25481 AcControl: some Daikin S21 Aircons not communicating
- BG-I26154 Touch Night Light Watchdog resets
- BG-I25759 Touch Night Light Display briefly turned on after POR
- BG-I21717: Nano IO and Nano Dimmer: improved touch handling
- BG-I26173: Nano IO going offline
- BG-I17870: Nano update fixed
- New NFC Code Touch Binaries:
- Better error checking during nfc learn mode (trust data not written correctly was not detected)
- Better error logging
- New Touch Pure Flex Binaries:
- BG-I18724 Touch Flex time out of sync
- BG-I26476 Valve Tree: actuators losing calibration data
- New binaries (14.05.11.08) for Belimo Tree/Air (Fix: Startup error messages, Online state handling)
- Dali Air: Conversion for devices created in older versions
- BG-I26448 Ac Control Air: Mitsubishi Heavy Industries loses address of aircon
- NFC Code Touch Tree: overhaul of NFC handling, quicker response and better diagnostics
Shading
- BG-I26280 Dts handled incorrectly
- BG-I17902 Automatic Jalousie does not fully close after manual slat position
Audio
- BG-I26744 Audio Central: DisP not forwarded to Music Players
- BG-I26540 Audio Central: Lock not forwarded to Music Players if DisPc is set at the same time
- Miniserver Compact
- TuneIn Ads Jingle removed
- Prebuffering for Radio removed
Climate
- BG-I22318 Climate Controller selection dialog: inherit-flags not set when using check all / uncheck all
- BG-I26194 Intelligent Temperature Controller: fixed inconsistencies when using fahrenheit
- BG-I26251 Intelligent Roomcontroller: invalid mode selected when current temperature is above heat protection
- BG-I25940 Ac-Control: first target temperature not assigned
- BG-I26096 Ac-Control: Invalid values on inputs(Mode,Fan,Adir) select next possible value
- BG-I26013 Climate controller dialog: disable unassignable room controllers
- BG-I26415 AC Control Air: invalid type-name after loading from miniserver
- BG-I26383 IRC: Presence Button has no function when Dwc is active
- BG-I26373 Disable heating/cooling ban not considered in calculating mode
- BG-I26363 AC Control Air adds Vane 5 to Mitsubishi Electric
- BG-I26553 IRC: invalid temperature info when window contact changes to off
- BG-I26853 IRC: Prepare phase not started when fixed setpoint calendar entry
- BG-I26842 Climate Control doesn’t save changes made by the “unselect everything” option
- BG-I27134 Intelligent Room controller: learning of heat up times disabled by presence input
- Intelligent Roomcontroller: Systemmessage “Big Difference” comes too early when comfort mode is started with presence
Lighting
- BG-I26364 Hotel Light Controller: Remanence not working
- BG-I25837 Lico does not detect Memory flag set to Smart
- BG-I27070 Light controller: sequences not properly unmixed for moods with multiple sequences
Energy
- BG-I26145 Spot Price Optimizer no status update sent to app after reset
- BG-I26316 Wallbox Gen1: Output Cpl set to 0
- BG-I26229 Modbus on Wallbox doesn’t pick up Modbus settings from template
- BG-I26271 Spot Price Optimizer: Old limits are used when trigger is exactly at hour change
- BG-I26271 Spot Price optimizer: Wrong categorization of values after a reboot
- BG-I26395 Spot Price Optimizer: Show data source and unit next to spot market options
- BG-I27065 Energy Manager causes Miniserver reboot when priority input is out of bounds
- BG-I27066 Energy Manager: Assumes power is available when a load was activated by something else (That power is now not used anymore for calculation of the available managing power)
- Wallbox: Connection fee provided by Manager not correctly set
- BG-I26977 Wallbox displays wrong state in app
- BG-I27053 Wallbox: charge limit not assigned via API-Connector
- BG-I26044 Spot Price Optimizer: Spot source has problems with values at midnight in specific time zones
Multiplicator
- BG-I26504 System schematic image not transferred to Miniserver
- Connection flags missing when loading from Miniserver
- BG-I26318 Audioserver added via program change not working
- BG-I26792 Editing of global project settings may cause a config crash
- BG-I27018 Language not changed when saving via Multiplicator project to the Miniserver
Trust
- BG-I26273 Trust Member Miniserver version not set
- BG-I26235 Trust Link does not use description for name of members
- BG-I26269 Changes of transferred users not sent to trust
- BG-I26269 Trust data not synchronised due to race conditions or high data load
- Trust IO: Miniserver sends same command to a Miniserver multiple times
- BG-I26372 Trust: Already created IOs shown again in the search
- Trust: No proper internal name for created IOs
- Miniserver now caches resolved clouddns address
- This results in faster send of messages when a trust member is using clouddns
- Trust Link Authentication more robust
- User change from another Trust Member
- Reverify the certificate from a Trust Member before using public key to improve security
- BG-I26568 Trust search: Members not sorted
- BG-I26917 Trust communication race condition causes Miniserver reboot
Belimo
- BG-I26308 Belimo Air: IO’s not sorted alphabetically
Diagnostics
- BG-I26103 Health Check description is used instead of name for some inserted items in tree view
- BG-I26089 stopping air diagnosis were blocking Config for few seconds in some cases
- BG-I26304 Air Diagnostics view was cleared when diagnosis has finished
- BG-I26116 Diagnostic views had empty column filters for columns only showing an icon or checkbox
- BG-I26016 Diagnostic views were missing Device type column content for device under diagnosis
Control History
- Do not use device-source for certain device-types (Nano Di Tree, Air)
- Show origin-control/device when using api commands
- Invalid recalculation-entry on end of shading period
- BG-I25976 Do not create locked-entry for short pulses
- BG-I26321 Shading block floods with entries
- BG-I26810 Auto Jalousie: History-Entry for preparing times written after saving remanence
- Invalid source name directly after reboot
Project Planning
- BG-I26327 LineIn-Id of created Audioserver not immediately set
- BG-I26787 Wrong power was used for LED Spot WW PWM in calculation
Stability
- BG-I26314 Config crash when editing light controller master colour
- BG-I26290 Config crash when opening user management dialog
- Several memory leaks
- Miniserver reboots due to race conditions when updating user objects from trust
- BG-I26525 Config crash when opening file
- BG-I26233 Config crash when closing tree learning dialog
- BG-I26214 Config crash in light controller dialog
- BG-I26218 Config crash when selecting range in tree
- BG-I24802 added possible fix for some crashes caused by System’s graphics driver in some rare cases
- BG-I26622 Config crash when restoring template preset of intelligent room controller
- BG-I26277 Crash when opening sequence control dialog
- Several config crashes
- Miniserver reboot when saving to Miniserver after Trust was deleted
- Miniserver reboot when replacing device via app learning