HDI|HX v2 Support Together With New Features And Improvements

Improvements

• HDI|HX "version 2" has been supported for the optional upgrade function HDI|HX.
  Cameras activated in previous "version 1" will inherit that information. Therefore you can use it even after updating the camera body.
  If you purchased NDI|HX after the update, you will need to activate it via EasyIPSetupToolPlus Ver.1.3.6 or later.
• The camera can be used with MediaBridge (Cloud Platform).
  The specifications for SRT protocol settings have been expanded.
  You can use IPv4, IPv6, or domain names for SRT protocols that were previously only available in IPv4.
  The setting item name have been changed from "Destination IP Address (IPv4)" to "Destination URI".
• Encryption has been added to communication with EasyIPSetupToolPlus.
  Related menu: Setup > Easy IP Setup Tool Plus > Plain text usage : Enable / Disable (Default)
• The encryption protocol TLS 1.3 can be used.
  When you use HTTPS to access the camera, you can use TLS 1.3 as the encryption protocol.
  Related menu: Setup > HTTPS mode
• The mDNS settings can be used.
  This setting allows you to access the camera via HostName.
  Related menu: mDNS Host name
• A menu to limit the lighting function of Tally has been added.
  This allows you to choose to turn off the camera's tally LED lamp.
  Related menu: Tally LED Limit R (or G) : Unlimit/ Limit
  If you "Limit" setting, only tally lamp of the camera is restricted. The external remote controller remains enabled.
• The Camera ID has been added to the tracking data setting item*.
  *Settings for the output of tracking data to be used in a virtual studio system or elsewhere.
  Related menu: System > Tracking Data Output > Camera ID: 0x00 - 0xFF

• The durability of the IRIS OPEN / CLOSE unit has been improved.
  The internal process has been improved to reduce unnecessary load on the internal IRIS drive unit.