The manufacturer QSC has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Q-SYS Designer Software: Touch Screen Support And Control/Monitoring Fix

Improvement(s)

  • Touch Screen Support
    Version 9.1.2 is required to support TSC-G2 touch screen models shipped after August 1, 2021. A notice will be included in the box for any TSC touch screen requiring this update.

Resolved Issue(s)

✔ ️ Control: ing a component with a NULL user label in the Remap UCI Controls [BETA] tool no longer causes an error message and Designer to close.

✔ ️ Monitor: A memory leak in the SNMP Query component has been fixed and no longer causes designs to stop.

Known Issue(s)

  • [Audio] Issues with Software Dante custom channel labels
  • [Audio] AES67 Tx: Cannot enable stream; "address not specified"
  • [Audio] CX-Q amplifier shows "Missing - Product License Required"
  • [Audio] Generic 70/100V Speaker: Custom Voicing name not updating
  • [Audio] CXD-Q, DPA-Q 8-channel: Amp reports short circuit fault - Incorrect impedance reading in Generic Loudspeaker components
  • [Video] I/O-USB Bridge: Compile error, "IO-USB can support a maximum of 7 USB In endpoints"
  • [Video] NV-32-H with System : "Fault - Decoder not receiving video from Encoder" message with HDMI 1 + HDMI 2 mode
  • [Video] NV-32-H: HDMI output stops working after switching HDMI I/O Device Type: Encoder to/from Decoder
  • [Video] PTZ Cameras: Cannot obtain DHCP address after changing from Static to Auto mode
  • [Control & UI] Q-SYS Control app for iOS: Unable to discover Cores on the network with iOS 14.0+
  • [Control & UI] Error, "Unable to proceed: You do not have sufficient access permissions"
  • [Control & UI] Meters frozen on newer PCs
  • [Control & UI] Error, "Response status code does not indicate success: 401 (Unauthorized)
  • [Control & UI] HID Conferencing "Ringing" LED inactive after design redeploy
  • [Control & UI] Connection issues with redundant Cores and Access Control enabled
  • [Control & UI] Loudspeaker blocks disappear when grouped
  • [Control & UI] Block Controller: Connection and Named Controls blocks missing from Edit window
  • [Management] Core Manager: Status page shows Inventory as "Unavailable"
  • [Management] Enterprise Manager: Redundant Core shows Inventory as "Unavailable"
  • [Management] Enterprise Manager: Dynamically-paired NV-32-H stuck in "Initializing" status with redundant Cores
  • [Management] Enterprise Manager: '+ Add Core' button disabled on Sites > Systems page
  • [Management] Enterprise Manager: "Internal Server Error" when adding a Core to a Site after a Core reset
  • [Management] Peripheral Manager: Blank page or 404 error after switching NV-32-H (Core Capable) to Peripheral mode
  • [Management] Peripheral Manager: "Site can't be reached" error after setting peripheral password
  • [Management] "Session expired" or "Core Communication Failure" error
  • [Management] "Connection lost" error when attempting to access Core Manager from iOS device
  • [Management] SNMP settings are cleared after upgrading from v8.0.0 or 8.1.1
  • [Management] "This Core is in Standby as part of a redundant pair" shows when running a non-redundant design
  • [Management] Cannot open Core Manager or Enterprise Manager in Internet Explorer
  • [Other Issues] Unable to open sample designs in v9.1.x
  • [Other Issues] "License expired" error after updating Core firmware
  • [Other Issues] Error: "Failed to get firmware value for key firmware_hash"
  • [Other Issues] Q-SYS Designer display issues with high DPI resolutions
  • [Other Issues] Q-SYS Designer communication becomes unstable after rebooting Core when Access Control is enabled

Note(s)

Receive Important Update Messages Stay tuned for upcoming QSC Q-SYS PTZ-IP Conference Cam updates

Was the content helpful to you?

Advertisement Advertise here?
Banner Logitech