Brings New Remote Pairing Plus Other New Features And Changes

Improvements

• The new "Remote Pairing" feature allows transmitters and receivers to be paired using a fully remote control from the "Device List", the "Device Details List" and the "Monitoring View".
This feature is available for SpeechLine devices (firmware version 4.1.1 or later) and network-
enabled chargers "CHG 2N/4N" (firmware version 3.0.0 or later).
• The "Location" field now supports entries up to 255 bytes length including any UTF-8 characters.
• The device location is now also stored on the devices. This feature is available for SpeechLine
devices (firmware version 4.1.1 or later) and TCC2 devices (firmware version 1.8 or later).
Please refer to "Known Issues" for handling conflicts with location names.
• A link has been added for users to provide feedback.
[New SpeechLine Digital Wireless features]
SL Multi-Channel Receiver DW:
• The "Identify" action can now be triggered on any MCR channel, even if the receiver is currently in "Pairing Mode".
• Different network modes ("single cable", "audio redundancy", "split") can now be switched using Sennheiser Control Cockpit.
• The Dante primary and secondary IP settings can now be edited

[New TeamConnect Ceiling 2 features]
• The Dante primary and secondary IP settings can now be edited.
• The Dante factory settings can now be restored via the reset button "DANTE Default Settings".
• Different network modes ("switched", "audio redundancy") can now be switched using Sennheiser Control Cockpit.

Open issues

• In case the location name between Control Cockpit and the location name stored on the device does not match, a notification will be issued in Control Cockpit. The location name used in the Control Cockpit application will be kept and stored on the devices.
• After updating the Sennheiser Control Cockpit from version 5.0 or earlier, multiple notifications of location name conflicts may occur (unless the location name stored on the device already
matches the location name used in the Control Cockpit).
• For Windows 7 users the updating from Control Cockpit Version 4.0.0 or earlier requires manually installation of the Microsoft Windows .NET 4.8 Package from https://dotnet.microsoft.com/download/dotnet-framework/net48 before continuing with the installation.
• Firmware updates of devices must be started from multi ions of unique product types only, due to a limitation in mixed multi selections.
• Operation of evolution G3 and G4 devices are limited to either one Sennheiser Control Cockpit installation or third party control.
• Evolution G3 and G4 devices can only connect within local subnets.
• We recommend clearing the browser cache after the update. Under certain conditions the browser may keep old user interface elements in its cache. Especially, updating from Control Cockpit Version 1.0.0 requires manually clearing the web browser cache (Ctrl-Shift-Del).
• The Cockpit-Tray application is not automatically started after an internal cockpit SW update.
You need to start it manually or reboot your computer.