The manufacturer Sennheiser has set up its devicebase profile. Contents like updates, compatibilities and support are maintained regularly.
Update

Multiple new features and added improvements

Improvements

New Product Support

Support of new Evolution Wireless Digital (EW-D) products:

  • EW-DX EM 2 Rack Receiver
  • EW-DX CHG 70N - network-enabled charger
  • EW-DX SK/ SK 3-pin - bodypack transmitter
  • EW-DX SKM/ SKM-S - handheld transmitter

New Evolution Wireless Digital features

  • Enable Sync to TX: feature to synchronize the following audio settings to the transmitter:
    • Lock: locks the user interface on the transmitter
    • Trim: controls the gain of multiple transmitters connected to one receiver
    • Low Cut: cuts out all of the low sound below a certain frequency
    • Mute Config: mutes the AF or RF function on the transmitter
    • LED: controls the active link LED on paired handheld and bodypack transmitters
    • Cable Emulation: emulates the influence of a cable by different types
  • Link Density Mode: doubles the number of usable carrier frequencies in the available spectrum
  • Audio Encryption: activates AES-256 encryption between transmitter and receiver

New SL DW features

  • Transmitter LED: switches off the LED on the SL Bodypack DW and SL Handheld DW

Open Issues

  • In case the location name between Control Cockpit and the location name stored on the device does not match, a notification will be issued in Control Cockpit. The location name used in the Control Cockpit application will be kept and stored on the devices.
  • After updating the Sennheiser Control Cockpit from version 5.0 or earlier, multiple notifications of location name conflicts may occur (unless the location name stored on the device already matches the location name used in the Control Cockpit).
  • Firmware updates of devices must be started from multi selections of unique product types only, due to a limitation in mixed multi selections.
  • Operation of evolution G3 and G4 devices are limited to either one Sennheiser Control Cockpit installation or third party control.
  • Evolution G3 and G4 devices can only connect within local subnets.
  • We recommend clearing the browser cache after the update. Under certain conditions the browser may keep old user interface elements in its cache. Especially, updating from Control Cockpit Version 1.0.0 requires manually clearing the web browser cache (Ctrl-Shift-Del).
Receive Important Update Messages Stay tuned for upcoming Sennheiser Control Cockpit updates

Was the content helpful to you?