New features for TeamConnect Bar S and M

Improvements

TeamConnect Bar S and M

• The new feature Noise Suppression detects and suppresses unwanted static background noise (e.g. HVAC, fans etc.).
• The feature Noise Gate has been extended by a new Range parameter. The parameter defines the degree of Noise Suppression below the set threshold for the entire Noise Gate

Bug fix

• Collecting log and settings files as a compressed file via TrayApp sometimes resulted in an empty zip archive.

Known Issues

General

• Stopping the running Control Cockpit (CC) service via TrayApp takes comparably longer if CC is open in the browser.
• As the Control Cockpit user interface is protected by SSL encryption by default, a warning message may appear on the first start. This occurs because the certificate used for the encrypted connection is self-signed and created locally on your computer. The web browser is not able to verify the certificate authority. Alternatively, you can use your own trusted certificate for the connection.
• When configuring the proxy, only the “http” scheme is allowed as an authentication method.
• Firmware updates of devices may only be started from multiple selections of unique product
  types due to a restriction on mixed multiple selections.
• We recommend clearing the browser cache after the update. Under certain conditions the
  browser may keep old user interface elements in its cache. Especially, upda

Evolution Wireless

EW-DX EM 2 Dante

• After a factory reset the device details labels are greyed out. The function for editing the device, the channel or the location is disabled. Please restart the device or Control Cockpit Service to resolve the problem.
• After powering on EW-DX EM 2 Dante devices, their values for “DANTE Primary Settings”, DANTE Secondary Settings” and “Network Mode” cannot be saved for the first 40 seconds. During this time, the IP address of the Dante device is grayed out in the “Device List” and the inline-edit of the device “Name” and “Location” are not editable in the “Device” details page.
  After the first 40 seconds, it takes 3-5 seconds for a change in Dante settings to be saved. If the user changes other Dante settings within these 3-5 seconds, they will not be saved.
• The “OK” button remains disabled when editing channel settings a

EW-DX EM 4 Dante

• After a factory reset, the device details labels are grayed out. The editing function for the device, channel or location is deactivated. Please restart the device or Control Cockpit Service to resolve the problem.

ew G3/G4

• Operation of evolution G3 and G4 devices are limited to either one Sennheiser Control Cockpit installation or third party control.
• Evolution G3 and G4 devices can only connect within local subnets.

TeamConnect

TCC 2

• When a TCC 2 is configured with a fixed IP and mDNS is off, enabling mDNS and switching the IP mode to automatic will require the TCC 2 to be manually added again using its IP address.
• For TeamConnect Ceiling devices, the ‘Location’ field entry must be set. An empty field cannot
  be saved.
• In demo mode, the ‘Zone’ functions of the TeamConnect Ceiling 2 devices cannot be edited.

TCC M

1. After a factory reset of an existing TeamConnect Ceiling Medium device, the device’s factory name and locations will not be displayed until the device is reclaimed.

• If a TCC M has already been claimed, the “Identify” function will not work if attempted before claiming the device. No UI feedback will be provided. Please claim the device first before using the “Identify” feature.
• The device access password cannot be changed for multiple devices at the same time in a multi-selection scenario.

TC Bar

• When manually adding a TC Bar to the Control Cockpit, the TC Bar can no longer be deleted (even if mDNS is disabled) unless it is offline.
• If the IP of the TC Bar is grayed out or the TC Bar cannot be controlled via Control Cockpit, the control service may not be accessible, a restart of the TC Bar is recommended.
• The setting of the sound profile in Control Cockpit has no influence on audio streaming via Bluetooth (A2DP profile).
• If you deactivate the Dante protocol via Control Cockpit, the TC Bar must be restarted to completely terminate the audio stream.
• The license information for already claimed TC Bar devices can not be retrieved.

SpeechLine

• After (re-) discovering SLDW/MCR devices, the device status can sometimes be displayed as “offline”. Please reload the page and if the problem is not solved press the “Refresh list” button to display the current device status.