Removal of the PoE function for the TC Bar M

Bugfix

Removal of the PoE function for the TC Bar M

With this version of the Control Cockpit, the PoE function for the TC Bar M will be removed due to PoE compatibility issues. The TC Bar S is not affected by this.

Recommendation:

• Before updating to Control Cockpit version 8.1.1, please deactivate the PoE function on the TC Bar M if it is activated.

In case you have already updated Control Cockpit, you can either:

• perform a factory reset of the TC Bar M in order to deactivate PoE or
• wait for the next TC Bar M firmware version, which will deactivate the PoE feature by default.

Known Issues

General

• Stopping the running Control Cockpit (CC) service via TrayApp takes comparably longer if CC is open in the browser.
• As the Control Cockpit user interface is protected by SSL encryption by default, a warning message may appear on the first start. This occurs because the certificate used for the encrypted connection is self-signed and created locally on your computer. The web browser is not able to verify the certificate authority. Alternatively, you can use your own trusted certificate for the connection. For details, see the website: https://www.sennheiser-sites.com/responsive manuals/SCC or upload the files directly in the installer.
• When configuring the proxy, only the “http” scheme is allowed as an authentication method.
• Firmware updates of devices may only be started from multiple selections of unique product types due to a restriction on mixed multiple selections.
• We recommend clearing the browser cache after the update. Under certain conditions the browser may keep old user interface elements in its cache. Especially, updating from Control Cockpit Version 1.0.0 requires manually clearing the web browser cache.

Evolution Wireless

EW-DX EM 2 Dante:

• After powering on EW-DX EM 2 Dante devices, their values for “DANTE Primary Settings”, DANTE Secondary Settings” and “Network Mode” cannot be saved for the first 40 seconds. During this time, the IP address of the Dante device is grayed out in the “Device List” and the inline-edit of the device “Name” and “Location” are not editable in the “Device” details page. After the first 40 seconds, it takes 3-5 seconds for a change in Dante settings to be saved. If the user changes other Dante settings within these 3-5 seconds, they will not be saved.

CHG 70N-C:

• The update process for cascaded CHG 70N-C chargers can take up to 15 minutes. The update starts with the last displayed cascaded device and continues in ascending order up to the master device. Devices that display dashes are unreadable due to an error.

ew G3/G4:

• Operation of evolution G3 and G4 devices are limited to either one Sennheiser Control Cockpit installation or third party control.
• Evolution G3 and G4 devices can only connect within local subnets.

TeamConnect

TCC2:

• For TeamConnect Ceiling devices, the “Location” field entry must be set. An empty field cannot be saved.
• In demo mode, the ‘Zone’ functions of the TeamConnect Ceiling 2 devices cannot be edited.

TCC M:

• After a factory reset of an existing TeamConnect Ceiling Medium device, the device’s factory name and locations will not be displayed until the device is reclaimed.

TC Bar:

• When connecting both ports of the TC Bar M to a common switch, there is a risk of creating loops. Make sure your TC Bar M is always connected to two different networks that do not run via a common switch. For more details see chapter Network Loops of the user manual.
• When manually adding a TC Bar to the Control Cockpit, the TC Bar can no longer be deleted (even if mDNS is disabled) unless it is offline.
• If the IP of the TC Bar is grayed out or the TC Bar cannot be controlled via Control Cockpit, the control service may not be accessible, a restart of the TC Bar is recommended.
• The setting of the sound profile in Control Cockpit has no influence on audio streaming via Bluetooth (A2DP profile).
• If you deactivate the Dante protocol via Control Cockpit, the TC Bar must be restarted to completely terminate the audio stream.
• The license information for already claimed TC Bar devices can not be retrieved. SpeechLine
• When manually adding an SLDW4CH or SLDW2CH device via an IP with mDNS disabled, the device status can sometimes be displayed as “offline”. Please refresh the page to display the current device status.