Enhancements to support Designer 6.0.0
Improvements
- Enhancements to support Designer 6.0.0
- Additional hardware support
Known Issues
- An 802.1X re-authorization request interrupts a firmware update and causes it to fail
- Workaround: restarting the update will resolve the problem
- AES67 support is only available on UltimoX hardware
- MXA310 devices manufactured as of July 2017 are compatible with AES67
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
- The Mute Control Function command string response is incorrect when using <get all="">
- When using , the response is as documented.
- When using , the response should be mapped as follows:
- Response Actual MUTE_CONTROL_FUNC
- Response Actual MUTE_CONTROL_FUNC
- GET 0 ALL Response Actual MUTE_CONTROL_FUNC
- REP MUTE_BUTTON ON REP MUTE_CONTROL_FUNC LOGIC LOCAL
- REP MUTE_BUTTON ON REP MUTE_CONTROL_FUNC LOCAL LOGIC
- REP MUTE_BUTTON OFF DISABLED
Notes
- To operate this version of MXA310 with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of MXA310 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
- Designer 6.0.0
- ANI22/ANI4IN/ANI4OUT 6.0.41
- ANIUSB 6.0.44
- MXA710 6.0.24
- MXA910 6.0.24
- MXA920 6.0.38
- MXA901 6.0.39
- MXA902 6.0.32
- MXN5-C 6.0.17
- MXA-MUTE 6.0.25
- MXW 10.0.X
- P300 6.0.38
- SCM820 1.4.3
- Shure Update Utility 2.8.4
- Shure Web Device Discovery 1.2.17</get>