Support for added hardware revisions

Improvements

• Support for added hardware revisions

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
• Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
• Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
• Align the infrared ports with the transmitter
• Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
• ULXD 2.8.6
• Axient AXT600 Spectrum Manager 2.1.41
• SBC250/450/850 Networked Charging Stations 2.8.6
• Shure Update Utility 2.8.4
• ShurePlus Channels iOS 1.6.1
• ShurePlus Channels Android 1.6.2
• Wireless Workbench 6.15.4 or 7.0.1