ABB
IPR/S3.1.1
The ABB IPR/S3.1.1 is an interface module used to connect the KNX bus system with the Ethernet network.
Top 10 products from the area Interfaces
1
ABB
IPR/S3.1.1
IPR/S3.1.1
3 Compatibilities0 Updates0 Discussions44 Follower
Interfaces2
Loxone
RS232 Extension
RS232 Extension
4 Compatibilities0 Updates0 Discussions37 Follower
Interfaces3
zennio
KCI 4 S0
KCI 4 S0
2 Compatibilities0 Updates0 Discussions39 Follower
Interfaces4
Busch-Jaeger
USB Interface
USB Interface
3 Compatibilities0 Updates0 Discussions29 Follower
Interfaces5
Loxone
Dimmer Extension
Dimmer Extension
2 Compatibilities0 Updates2 Discussions26 Follower
Interfaces6
Loxone
DI Extension
DI Extension
2 Compatibilities0 Updates0 Discussions25 Follower
Interfaces7
Enertex
KNXnet/IP Interface
KNXnet/IP Interface
1 Compatibilities0 Updates0 Discussions25 Follower
Interfaces8
Loxone
DALI Extension
DALI Extension
3 Compatibilities0 Updates0 Discussions22 Follower
Interfaces9
Enertex
IP Secure Interface
IP Secure Interface
1 Compatibilities0 Updates0 Discussions23 Follower
Interfaces10
Gira
KNX IP interface
KNX IP interface
1 Compatibilities1 Updates0 Discussions20 Follower
InterfacesFurther products from the category Interfaces
Categories
Brand
Sort by
Loxone
RS232 Extension
The Loxone RS232 extension adds additional output to the system, allowing you to operate devices that use RS232 technology.
zennio
KCI 4 S0
The Zennio KCI 4 S0 is a KNX consumption meter interface, enabling data transfer for up to four consumption meters.
Busch-Jaeger
USB Interface
The Busch-Jaeger USB interface is an additional module used to provide the ability for data exchange between the KNX system and a computer.
Loxone
Dimmer Extension
The Loxone Dimmer Extension enables the Miniserver to dim the standard lights across the home automation system.
Loxone
DI Extension
The Loxone DI Extension helps with accommodating the sensor's wiring and third-party switches.
Enertex
KNXnet/IP Interface
The Enertex KNXnet/IP Interface is an interface module that supports up to eight KNXnet/IP tunnels in the home automation area.
Loxone
DALI Extension
The Loxone DALI Extension is an additional module for intelligent and flexible control of DALI technology devices.
Enertex
IP Secure Interface
The Enertex IP Secure Interface is a KNX module component for coupling the smart home KNX bus system with the IP backbone.
Gira
KNX IP interface
The Gira KNX IP is an interface module used for coupling a PC to the smart home KNX bus system.
Gira
KNX USB data interface
The Gira KNX USB data interface is a module that is built into the home automation system to enable data transfer from PCs to the KNX system.
Loxone
Air Base Extension
The Loxone Air Base Extension wireless technology is designed for perfect Loxone project connection and retrofitting.
Loxone
Multi Extension Air
The Loxone Multi Extension Air is a device used for versatile retrofitters and control of multiple different sensors and actuators.
MDT
SCN-USBR.02
The MDT SCN-USBR.02 is a USB interface that enables communication between the PC and the KNX/EIB system.
Loxone
KNX Extension
The Loxone KNX Extension is designed for the integration of up to 500 additional KNX/EIB group addresses in the home Loxone system.
knxpresso
IP interface
The knXpresso IP interface is a KNX-IP module interface that enables unrestricted connection between an IP network and a KNX bus system.
Loxone
Tree Extension
The Loxone Tree Extension enables the free-form wiring topology of the Loxone Tree technology reducing the cables required for automation.
Loxone
Relay Extension
The Loxone Relay Extension is an extension powerhouse with fourteen 16A-rated relays, supporting even the heaviest loads.