Provides Support for SMPTE Mode together with some quality enhancements

Improvement(s)

? Added support for SMPTE mode* (ST2110-30 clocking) in Dante Domain Manager (DDM). Please note, once a Dante device is enrolled in DDM, various device settings cannot be altered, including Word Clock, Preferred Master and Latency settings. To alter such setting using the console, the Dante device must first be un-enrolled from the Domain and then use Dante Controller to 'Clear Domain Credentials'

*With SMPTE mode enabled in DDM, the domain is configured for SMPTE ST2110-30 clocking, enabling audio interoperability between Dante and non-Dante SMPTE devices.

✔ ️Reduced the likelihood of an error occurring that causes the message "kernel sysdwn, operation cannot be performed." to be displayed.

✔ ️Reduced the issue occurring that VIRTUAL is still displayed on the DEVICE MOUNT screen for devices participating in DDM.

Resolved Issue(s)

✔ ️ Fixed a bug in which HA of MTX3 could not be controlled using V5.60.

✔ ️Fixed a bug in which an INTERNAL USER KEY could not be generated without [FILE LOAD]-[LIBRARY LIST] authority being set in USER LEVEL when logging in as a power user.

✔ ️Fixed a bug in which Dante Output Patching of a mounted device may have been removed when mounted.

✔ ️Solved a problem in which the message "NETWORK AUDIO MODULE FAILED. PLEASE RESTART THE CONSOLE" might have appeared even when the console was started up normally.

Known Issue(s)

? The following problems are found in version 8.1.1 of CL StageMix.

• If the CL StageMix screen is switched from the Master Bank that shows the Stereo/Mono levels properly to another bank and then returned to the Master Bank via the Navigation/Meter Bridge, the level meters in the Master Bank become inactive. This can be solved by rebooting the application or changing the metering points for Output Channels from the SETUP options.
• CL StageMix is often forced to terminate if a scene is recalled via a console just after the DANTE NAMES TO CHANNELS function in the Port Patch S menu is executed. This can be solved by rebooting the application.

? The console may become inoperable after a "kernel sysdwn" message due to an unexpected error.

• If this happens, the console needs to be restarted. However, since all the settings including Dante settings* will be initialized to the default, please back up data regularly.

* It will be set to DAISY CHAIN after the initialization. If the console is used via a redundant connection, unplug the Dante network cable first before reconfiguring the Dante settings.

? A device enrolled via DDM (Dante Domain Manager) rarely appears with a "VIRTUAL" indicator on the DEVICE MOUNT page. If this indicator is shown, press the REFRESH button.

? If Dante Virtual Soundcard (DVS) is patched to the CL series device using Dante Controller, the patching may not be recalled correctly when the CL series device is restarted. In such cases, patch the DVS again. In addition, when using a version of DVS for Windows that is older than v3.2.0, patches after CH41 cannot be performed from CL series consoles.

? Loading of a file created by version V1.15 or older will not include the mount information of Dante devices other than any connected R-series. It is the same when recalling a DANTE PATCH LIBRARY. Please reset MOUNT, PATCH, and DANTE PATCH Library data using V1.51 or later if necessary.

Note(s)

? Visit this link for full detailed release notice.