Added Factory Preset Libraries, RUio16-D Support, And Other Improvements

Improvements

New features

• Factory preset libraries have been added to the following effect plug-ins.
  Dual Pitch, Gate Reverb, Reverb, REV-X
  Amp Simulate, Analog Delay, Auto Pan, Chorus, Delay LCR
  DynaFilter, DynaFlange, DynaPhaser, Early Reflections
  Flange, Max100, ModFilter, Mono Delay, Phaser, Ring Mod
  Rotary, Stereo Delay, Symphonic, Tremolo, VintagePhaser
• RUio16-D has been added to the Supported Devices list in SYSTEM CONFIG.

• Made the following improvements to Global Paste -
  • Scene recall and other related operations can now be actioned during Global Paste processing.
  • If a destination scene that has not yet been pasted to is recalled during Global Paste processing, the scene data prior to processing will be recalled.
  • Added an Automatic follow for Current Scene button to the GLOBAL PASTE destination scene list.
  • The destination scene ion is now automatically cleared after Global Paste is executed for manually ed destination scenes. This does not apply to Scene Groups.
• Improved overall scene recall performance.
• Some GUI improvements for CS-R10, CS-R10-S, and CSD-R7 control surfaces.
• Manual channel fader operations now result in smoother audio level changes.
• When Plug-ins mounted in a recalled Scene are the same as in the previous Scene and a plug-in view is displayed during a scene recall, the plug-in view will remain constant during the recall.
• PRE D.GAIN meter point has been changed so that the PLAYBACK signal level during Virtual Sound Check will be displayed.
• "DSP ACTIVATE A/B" has been removed from the USER DEFINED KEY menu, to avoid operational errors.
• When different ports are patched to A and B, the unselected ports will not contribute to the 256 limit for patches on the TWINLANe card.
• The PRE D.GAIN meter on the ED CHANNEL VIEW screen is now always displayed, even when a source with no Amp is patched to the channel.

• Solved a problem with CS-R3, in which two SEND LEVEL knobs would appear on the OVERVIEW screen after the console is power cycled or a settings file is loaded, instead of showing PAN & SEND for stereo MIX or MATRIX buses.
• Solved a problem with the CS-R10-S, CSD-R7 and CS-R3 that could cause the DCA/MUTE assignment to appear incorrectly on the OVERVIEW screen.
• Solved a problem that could cause MIDI Rx messages to be missed.
• Solved a problem in which MIDI Control Changes assigned to channel HPF and LPF may not be transmitted.
• Solved a problem in which SRC was controllable for MY cards which do not include SRC functions.
• Solved a problem in which the RTA would disappear if channels were switched frequently within a short period of time while the RTA was being displayed.
• Solved a problem in which audio output from MONITOR A/B would stop for several seconds during the first DSP switchover after power-on of the DSP mirroring system.
• Solved a problem in which, when MONITOR or CUE was assigned to a custom fader, the numeric display in the channel name area would not be updated until the fader was released.

• A problem was found in RIVAGE PM V5.10, in which CUE keys are not lit/unlit correctly when CUE OPERATION MODE is set to BAY and the CUE A/B settings are varied among the bays.
  This is a problem only with CUE key lighting on the channel strip section, while the actual audio and ED CHANNEL VIEW work properly.