New features and bug fixes

New features

• Genius.lab* functionality has been added.
• * Genius.lab is a functionality that allows you to freely set up a sequence of actions (= macros) to be executed when certain conditions are met.
• Interphase* plug-in has been added.
• *Interphase is a plug-in that adjusts the time and polarity between two channels using Delay, Polarity, and an All-Pass filter. By adjusting these parameters, the two channels can be time and polarity aligned.
• FET LIMITER and DIODE BRIDGE compressor options have been added to Channel DYNAMICS types.
• A MIX BALANCE parameter has been added to all channel DYNAMICS types.
• DM3, DM7/DM7 Compact, DME7, and Tio1608-D2 have been added to the SUPPORTED DEVICE list in the DANTE DEVICE SELECT pop-up screen.
• A mode has been added to Store and Recall CUSTOM FADER LAYER channel assignments with Scenes.
• The NOMINAL POSITION of PAN can now be selected between LR NOMINAL and CENTER NOMINAL.
• A PHASE reverse switch has been added to all MIX buses, MATRIX buses, and STEREO buses.
• Output load impedance of OMNI OUT and RY16-DA can now be selected from 600Ω and 10kΩ.

Improvements and Changes

• Improved behavior regarding synchronization of BPM and tap tempo of plug-ins.
• A PHONES LEVEL LINK button has been added to the MONITOR SETTING pop-up screen.
• When a USER DEFINED key is used to enter the SENDS ON FADER mode to a specified bus, the mix select pop-up screen will no longer open.
• Word clock leader indication for the DSP icon has been added on the SYSTEM screen.
• In THEATRE MODE, the state of the CH ON FOLLOWS DCA ASSIGN setting now remains in place following a power cycle.
• Changed the display on the OVERVIEW screen and DYNAMICS1/2 pop-up screens (CH 1-72, CH73-144, MIX, MTRX/ST) to show dynamics on/off status.
• The output port on the OUTPUT tab of the DANTE PATCH pop-up screen now displays the name of the channel being patched.
• RY cards that do not have an INPUT PORT cannot be set to TWINLANe assignment ON.
• Plug-in parameters can now be changed by touch-and-drag on screen.
• Fader Banks to be displayed in RIVAGE PM Editor can now be assigned for Recall Safe/Focus Recall and Global Paste.

Fixed bugs

• Fixed a problem in which DANTE PATCH could be changed when loading a settings file, even though the DANTE PATCH (NAME) BY - DANTE CONTROLLER was selected.
• Fixed a problem that caused a DANTE DEVICE to remain Virtual in certain rare cases when a settings file was loaded.
• Fixed a problem in which, in a system with multiple DSP engines, the TWINLANe network assignment might be removed when one of the DSP engines was restarted.
• Fixed a problem in which the lowest event in the event list was executed if there was a glitch (discontinuity) in timecode into the system.
• Fixed a bug that caused faders to move incorrectly in rare cases when switching fader layers on the CS-R3.
• Fixed a problem in which the global pasting of stereo input channels would cause the L-ISA-related parameters of the L channel to be copied over to the R channel and become identical.
• Fixed a problem in which the network or connected device status of a card mounted in the HY slot was incorrectly displayed as an error in rare cases during system startup.
• Fixed a problem that caused an incorrect Cooling Fan State:[Error] log entry to be generated as the system was turned off.
• Fixed a problem in which PROGRAM CHANGE was output from the MIDI OUT of the console when a scene was recalled in PREVIEW mode.
• Fixed a problem with the RIVAGE PM Editor in which the BAY MODE setting for CUE A/B was not reflected in the SELECTED CHANNEL VIEW.
• Fixed a problem, on CS-R3 only, in which pressing the HOME key when nothing is bookmarked to the key caused the currently selected channel to be unselected, and the system might then be forced to restart when displaying the EQ pop-up screen in this state.
• Fixed a problem where one type of Output Bus could be wrongly copied to a different type of Output Bus by using the COPY & PASTE keys on the console’s top panel.

Known issues

• Activating the LEARN function of the DaNSe plug-in may lead to a delay in processing audio parameters that are edited during the processing of the LEARN function itself in V6.01. The result of LEARN may also take longer than usual to be applied. This will be fixed in a future update.
• The gain metering function of the Dugan Automixer is not operating correctly in V6.01, although the actual performance of the automixer is correct. This will be fixed in a future update.
• The FET LIMITER does not operate correctly when used on stereo channels numbered in multiples of 6 (channels 6+7, 12+13, 18+19 and so on.) in V6.01.
• This will cause distortion on those channels. This will be fixed in a future update.