Provides various new features plus quality improvements and bug fixes

Improvement(s)

? Added the "Rupert Neve Designs PorticoⅡ 　 Master Buss Processor" plug-in.

? Added the following features to Global Paste to achieve simpler and easier operation.

• The Parameters can be ed while mixing, using SET BY EDIT.

• Multiple combinations of destination scenes can be set, using SCENE GROUPS.

• Global Paste can be assigned to the USER DEFINED keys.

? Added the following features to the mirroring functions to improve operability.

• An RPio can be the word clock leader to prevent loss of word clock source in the event of a DSP engine failure.

• The DSPs can be connected by GPI for high-speed switchover.

• The processing of the standby DSP engine to follow the active DSP engine is sped up.

? The system can monitor and control Nuendo Live multi-track recording software.

? Added various wireless mic systems and amplifiers that can be controlled and monitored from the RIVAGE PM Dante device rack.

? Now supports OSC (Open Sound Control).

? Now supports the control of AFC Image, allowing object operations and scene recalls.

? Added LPF / HPF and ATT to 8Band PEQ, monitor and cue EQs. Multi-touch operation is now available on these screens.

? Now supports the SMPTE mode* of Dante Domain Manager (DDM) (ST2110 clocking).
The word clock and preferred leader cannot be changed during DDM enrollment.
* In DDM SMPTE mode, the domain is configured for SMPTE ST2110 clocking, providing audio interoperability between Dante and non-Dante ST2110-30 devices.

✔ ️RIVAGE PM Editor for Win now supports AMD CPUs.

✔ ️ Solved a problem in which MIDI NOTE ON/OFF might not be transmitted correctly if a User Defined Key to which MIDI Note ON was assigned was rapidly pressed several times.

✔ ️ Solved a problem in which "DSP Disconnected!" was displayed under certain rare conditions.

✔ ️ Solved a problem in which a CS-R3 fader that had been moved by its motor might return to its previous position after manually moving it.

✔ ️Solved a problem in which, when using the PM Editor with two screens, a screen that was not operated would not reflect the HA eter switches between A and B made on the other screen.

✔ ️ Solved a problem in which the RPio would not output the sound after manually switching the DSP engine while mirroring.

✔ ️Solved a problem in which the faders on a bay that was not used for DCA roll-out operation would not move smoothly.

✔ ️Solved a problem in which the send level of either stereo L or R channel could not be adjusted when moving from the MATRIX field on the ED CHANNEL VIEW screen to the SENDS TO pop-up screen and ing the stereo bus as the source.

✔ ️Solved a problem in which settings for ANALOG GAIN including Phantom Power and so on would unexpectedly be pasted to the destination channel(s) if an CHANNEL without ANALOG GAIN was copied using the CH COPY function.

✔ ️Solved a problem in which output patches of HY card slot 2 were not taken over automatically by a changeover from A (active DSP engine) to B (standby DSP engine) when the HY card slot 2 of the RPio was set to ROUTING MODE2 in the mirroring.

✔ ️Solved a problem in which changing the ed channel while the Dynamics KEY IN CUE was active, would cause a momentary disengagement of the cue and a brief leak of audio from the assigned Monitor Source into the cue bus.

✔ ️ Solved a problem in which the image of an inserted MY card such as the MY8-AD24 or the AVIOM M16/o-Y1 was not displayed on the console.

✔ ️Solved a problem in which frequent editing of scenes while mirroring or in a system with multiple controllers (console and PM Editor, dual consoles, etc.) could create scenes that could not be recalled.

✔ ️ Solved a problem in which Midi Program Change Assignments might not be correctly displayed after loading file data.

? A problem was found in V5.00 where a User Defined Key that is assigned to either a channel on/off, A/B, or surround pan on/off function, will temporarily not work or will show incorrect status after a scene is recalled. This can be solved by directly operating the function assigned to the User Defined Key, or by changing the bank of the User Defined Key, and then reverting to the original bank.
* This occurs only in V5.00, and neither occurs in V4.72 nor in earlier versions.

? A problem was found in V5.00 in which the screen will not show correct information of BANK A/B when a channel is changed while the EQ popup window of an /output channel is displayed. This can be solved by closing the EQ popup window or selecting another tab, then reopening the EQ popup window.
* It occurs only in the default mode of V5.00, so it does not occur in Theatre mode and not in any mode with V4.72 and earlier versions.

? Regarding all versions of RIVAGE PM Firmware, including V5.00, we found a problem in which, after the first switch over of a mirroring system, the monitor A/B will not produce any sound for several seconds.
Temporary countermeasure:
Execute a manual switchover after turning on the power of both DSP A/B. After that, the problem will not occur again, until the DSP is rebooted.