New Firmware Update Enhances Functionality and Resolves Issues

New Features:

• A new search function filters the Device/Signal Processing list based on the search term for improved device discovery.

Enhancements:

• Improved messaging in the Dante Firmware update dialog directs users to the DanteUpdater application accessible from Dante Controller.

Fixed Bugs:

• General Issues
• CSP or PowerSpace+ can now coexist on the same network with ControlSpace devices.
• User changes to wiring in Project and Signal Processing views are now saved properly.
• Audio route labels with Conference Room Router are now updated correctly.
• Addressed issues leading to corrupted merged files.
• Fixed crash when retrieving projects with incompatible IP addresses.
• Resolved ESP-00 crash when checking system resources.
• Project View icons for ArenaMatch arrays have been updated.
• Audio Processing
• Dante firmware update dialog now reads accurate instructions.
• Resolved ESP Resources crash with Predictive Feedback Suppression.
• Saved PEQ files now retain extra bands after loading.
• Fixed signal routing corruption in Stereo Room Combiner when using Dante for BGM distribution.
• User now receives warnings when deleting a Dante Audio Routing block.
• Addressed AEC Gain storage issue when saving settings.
• Fixed crash in EX-1280 with modified Matrix Mixer in project files.
• Matrix Mixer port count is now accurate.
• Control
• Resolved issue with incomplete deletion in Logic Action assignments.
• Corrected gain control functionality for CC-64 with EX processor.
• Room Combine state is now properly read-only.
• SV/GV functionality now works for Dante I/O in EX processors.
• Fixed logic action assignment errors within Logic Blocks.
• Dante
• Resolved incorrect status display for unassociated Dante devices.
• Improved endpoint connection status response time.
• "Add Dante Endpoints" menu is now disabled when Dante Control is inactive.
• Fixed control issues for Dante via serial IP with EX-1280.
• Improved storage of Gain properties when adding Dante I/O to a group.
• Updated Project View icons for Dante device enrollment status.

Open Issues:

• General Issues
• Dante devices may not be discovered if network address mismatches with project settings.
• Signal Processing
• USB Input Module will not display Metering data if not connected to an Output Module.
• ControlSpace Designer Logic Blocks
• Logic Action assignment errors persist with ESP-00 and EX-1280.
• Incorrect state display for Logic Connectors is reported.
• PSetRecall block issues when changing PSet selections post-wiring.
• Meter block logic outputs do not change color despite correct triggering.
• Dante End Points
• EX-8ML may initially boot with a Local address instead of DHCP.
• Telephone Call Functionality
• PSTN and VoIP ring/voice levels cannot be properly set.
• ControlSpace Remote
• Issues ending VoIP calls on Avaya systems when the Far End is on hold.

Update Instructions:

• To perform the firmware update, ControlSpace Designer software will automatically detect the circuitry version present and load the appropriate firmware.
• For processors with new A/D and D/A hardware, update is necessary for proper functionality. Refer to the manufacturing start and date codes for specific models:
• ESP-880A (Start: July 2021 | Code: 1201)
• EX-12AEC (Start: July 2021 | Code: 1201)
• EX-1280 (Start: July 2021 | Code: 1201)
• EX-1280C (Start: August 2021 | Code: 1228)
• EX-440C (Start: July 2021 | Code: 1201)