The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Added support for Conditionals and Variables

​Upgrade Instructions

  • CP4-R V1: Please confirm that your processor is a V1 model before loading FW manually. To confirm, connect to the processor via text console in Toolbox and issue the command "ver -v". The model number on the first line will show "CP4-R Cntrl Eng". If wrong file is used there are no side effects, and the Firmware upgrade will fail.

Change Log:

New Features

  • Added support for Conditionals and Variables
  • Conditionals let you create IF and ELSE statements in Sequences. In IF statements, the value of variables or the value of device states can be compared
  • Added additional events for devices and subsystems providing the ability to program actions based off state changes
  • Added support for creating lock codes via the Crestron Home application for Crestron Yale InfinetEX locks
  • “Cloud Owner” status is required via the app to create lock codes
  • Added support for the DGE-1000. A Video Preview is shown on the video control pages for sources routed to the DGE-1000. The full-screen video view is available via the selection of the video preview window
  • Added support for Room-to-room Calling between Crestron touch screens
  • The following touch screens are supported:
  • TSW-1070/770
  • TSW-1070/770-R
  • TS-1070/770
  • TSW-1060/770/560/560p
  • TST-1080
  • The DGE-1000 does not support Calling or Paging
  • Added support for the DM-NAX-BTIO-1G functioning in receiver mode
  • Added support for control of Lutron Ketra and Lumaris loads natively
  • Added support for controlling shades in a multi-processor system
  • Shades can now be added to a child processor and will be imported to the parent processor (same as Lights)
  • Added support for the SAROS DM-NAX-IC4A and SAROS IC4P
  • Added support for engraving the new Horizon Glass Keypads in Crestron Home
  • Improved the Sonos experience when switching between Music and the eARC or Line inputs on Sonos soundbars. Users will no longer need to turn off a zone to switch back and forth between music and eARC/Line Inputs
  • Updates must be made to source routes on the Sonos device in the Crestron Home application to take advantage of this improved experience
  • Added support for the following new Yale InfinetEX Door Locks
  • YRD410-PB
  • YRD420-TS
  • YRD430-PB
  • YRD450-TS
  • YRD614-PB
  • YRD624-TS
  • YRD634-PB
  • YRD654-TS
  • Added support for new Axxess devices
  • GRM
  • HCM
  • HCM Ceiling Mount
  • Plug-in Chime
  • ADA Flasher
  • Added support for labeling C2N-UNI8IO buttons in the Actions and Events section of the Crestron Home Setup application
  • Added support for a new global setting to modify the fade rate used by Crestron Home when controlling lighting loads
  • Added support for triggering interrupts from an Axxess doorbell
  • Added support for native Garage Door drivers. Garage door drivers using this new driver type will be shown in the House Access tile within the Crestron Home application
  • Added support for Lutron QED shades and Neon Cathode Lighting Loads

Bug Fixes and Behavior Changes

  • Resolved issue where certain Lighting drivers were not showing up in the Crestron Home driver menu
  • Removed the now playing bar from the browse menu on Crestron Touch Panels to improve the browsing experience
  • Resolved issue where Satel security systems were not triggering Crestron Home interrupts for any events such as an entry delay
  • Resolved issue where security system function buttons were not updating in the end-user app after being modified in the setup app
  • Improved performance of the climate control page when there are many thermostats in the system
  • Resolved issue with Crestron Home Extensions where button presses were not registering if the button was held for a short period of time
  • Resolved issue where a disabled driver was becoming re-enabled after a reboot
  • Resolved issue in multi-processor systems where keypad button feedback would continuously blink when the Circadian or SolarSync scene is active
  • Resolved issue with the CHV-TSTATA thermostat where setpoints were not appearing in the climate scenes page when the thermostat was configured to use a slab sensor
  • Resolved issue with the proper Bluetooth icon being used on the source selection page of the Crestron Home application
  • Resolved issue where favorited rooms were being lost when switching between Homes via the application
  • Improved app performance when accessing the cable box page via the video tile
  • Resolved slider issue on the Pool Page for IOS devices
  • Resolved intermittent issue with the DND icon for Crestron Touch Panels
  • Resolved issue in multiple display scenarios where the Video tile was not properly displaying the correct number of displays that are currently active
  • Resolved feedback issue with the “All Close” button on the Shades Details Page
  • Resolved feedback issue for “All On” and “All Off” lighting scenes when some loads are offline in the room
  • Resolved the issue with an icon missing on the Gate/Garage/Lock tile when it is in an error state
  • Resolved icon visibility issue on specific extension tiles found on both the room and Home screen
  • Resolved issue with media profiles not working properly when utilizing 2 different NAX streaming amplifiers
  • Resolved issue with Child processor crash occurring when the parent is still on a 3.21 FW version
  • Resolved scrolling issues on the end-user schedule
  • Resolved issue with adding Vitrea Keypads using a 2-button horizontal layout
  • Resolved issue where swiping from the left portion of the screen could bring the user directly to the Home Chooser page
  • Resolved issue with the Gates and Lock tile not showing the error icon if a gate was currently offline
  • Resolved issue with Shade Scenes where existing shades in a scene could lose their set values when adding a new shade to the scene
  • Resolved issue with the Locate functionality for NAX devices
  • Reduced time it takes for NAX devices to be added to Crestron Home
  • Resolved thermostat name overlap on the climate details page• Improved swipe sensitivity when closing certain pages
  • Improved swipe sensitivity when closing certain pages

Additional Notes:

For optimal paging performance it is recommended to update all touchpanels to the most recent FW found on the crestron.com website

Version: V1: 4.003.0104 Link
Receive Important Update Messages Stay tuned for upcoming Crestron CP4-R updates

Was the content helpful to you?

Advertisement Advertise here?
Basalte Fibonacci Banner