Fixes video connectivity issue and improves security and UI auto-save
Improvement(s)
✔ ️Web UI auto save improvements
✔ ️Security enhancements
Resolved Issue(s)
✔ ️DM‐ NVX‐ D30 and D80 fan now turns off when set to "auto", if the stream is no longer present
✔ ️ API updates ensure that all DM NVX endpoint names report consistently
✔ ️USB Hotkey now reports raw data in the serial join "Message_F". This ensure that the default USB data reports for all keys, up to the standard 104 key layout.
✔ ️Resolved video connectivity for Vaddio Roboshot with the E760 (HDBT).
Known Issue(s)
? Authentication screen may be displayed after a reboot. A refresh may be required to clear the error.
? The DM‐ NVX‐ E760 LED Disable will not disable the LEDs for the HDBT port.
? The DM‐ NVX‐ 36x LED Disable will not disable the LEDs for copper port # 3.
? When downgrading to 4.x or below, you will not be able to create a custom EDID entry in the lower FW version. All other entries will remain operational.
? When upgrading to version 5.1, custom DSCP values may change to default.
? Lan port # 3 on the DM‐ NVX‐ 36x may take up to 2 minutes to register a change to the interface
? When upgrading the DM‐ NVX‐ 35x, if analog audio was the ed audio source, it may revert to "Audio Follows Video". This can be resolved in the web UI, or via SIMPL programming.
? Stream subscriptions may be lost when downgrading from version 3.x to version 2.x.
? Streaming settings cannot be changed on the web interface when Statistics are enabled
? Unable to delete Active Directory groups with "/" included in the name of the group
? When a CA certificate is added to the web interface, the page must be manually refreshed in order to update the list
? The DM‐ NVX requires Username/Password for 802.1x "EAP‐ TLS Certificate."
? Crestron recommends using Google Chrome for firmware updates. When using other browsers, the firmware update may report as failed although it has actually succeeded. Check the firmware version in the status page to confirm a successful firmware update.
? DM‐ NVX‐ 351 and 363 are unable to down mix some s of Dolby Atmos (MAT 2.0) and DTSX to PCM 2ch audio.
Note(s)
? .PUF files are no longer supported above firmware version 5.x. When downgrading from firmware version 5.x or above, please use the .zip file found within the .puf file. See Online Help Answer ID 1000866 for more information.
? Firmware is installed using XiO Cloud, the device's webpage, or Auto Update via a 3 Series Control System, or using an SFTP server. Crestron Toolbox is not used to install this firmware.
? .puf files are supported in DM NVX Firmware version 2.0.3900.00049 and higher. When updating devices running firmware prior to 2.0.3900.00049, extract the appropriate .zip file from the .puf and update the DM NVX device.