The manufacturer Crestron has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

System Startup Hangs Resolved, Security Vulnerability Fixed

New Features:

Nothing known

Enhancements:

  • Fixed the main issue causing system hangs during startup, preventing endpoints from dropping offline.
  • Addressed security vulnerability on the DMC-STR by closing port 5555.

Fixed Bugs:

  • ✔ Resolved the issue causing the system to hang.
  • ✔ Fixed the security vulnerability on the DMC-STR.

Open Issues:

  • ? DMC-STR does not upgrade when units are upgraded from 3.02.18 to 3.03.x. See detailed info.
  • ? Adobe Air version 32 or later must be installed before XPanel installation.
  • ? Uninstall previous XPanel versions before installation to avoid failure.
  • ? Video wall configuration on DMC-4KZ-HDO cards may reset after power cycle or switcher reboot.
  • ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN ports to the same subnet.
  • ? DM-TX-200-C-2G HID routing may not survive switcher reboots.
  • ? Vertical bezel compensation value from DM Tool may not persist across reboot for DM-RMC-4KZ-SCALER-C.
  • ? Issues with sporadic output failures when routing same input to over 8 DMC-4KZ-HDO outputs.
  • ? Audio recovery delays observed on DM-MD32x32-CPU3 switcher with Audio Breakaway enabled.
  • ? Routing inputs to all outputs may lead to audio double lock during switching.
  • ? Web-based XPanel configuration tool lacks redundant power supply status on DM-MD8x8/16x16/32x32-CPU3(-RPS).
  • ? Reliability issues with DisplayPort input on DM-TX-4KZ-302-C.
  • ? Malfunction of TT-100 "Connect It" indicators when using certain ports.
  • ? Multiple audio format joins not functioning for specific DMCI symbols.
  • ? Double audio lock may occur with certain Blu-ray players when switching upstream.
  • ? Output issues related to HDR sources routed to DMC-4K-HDO.
  • ? Incompatibility with down-mixing DTS:X or Dolby Atmos audio on DMC-4K/4KZ-DSP input cards.
  • ? Potential instability in video output with specific streaming/Blu-ray connection setups.
  • ? False failures may occur when assigning Global EDID in fully populated DM-MD32x32 chassis.
  • ? DMC-STR reporting zero resolution from certain third-party cameras.
  • ? Reliability issues with Apple keyboard connections to RMCs.
  • ? HDMI audio instability with 480i video across all TXs (except TX-401-XX).
  • ? Removed support for certain feedbacks on streaming cards for stability reasons.
  • ? Streaming unsupported audio formats may cause the DMC-STR to lock up.
  • ? Network problems can cause DMC-STR to stop decoding; stopping and restarting the stream may recover.

Update Instructions:

Nothing known

Version: 3.03.11 Link
Receive Important Update Messages Stay tuned for upcoming Crestron DM-RMC-150-S updates

More from the Signalmanagement section

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad