Ethernet Port Issue Resolved; Multiple Known Issues Remain

New Features:

Nothing known

Enhancements:

Nothing known

Fixed Bugs:

• ✔ Fixed issue with cascaded system configurations causing disabled ethernet ports to enable during startup. More details here.

Open Issues:

• ? With safe cascade turned off, cascaded blade information does not show up after a hot plug of the fiber/cable.
• ? XPanel may become stuck on a "system is loading" screen post-reboot or power cycle.
• ? Adobe Air version 32 or later is required prior to XPanel installation.
• ? Uninstall previous XPanel versions from Desktop before installing from DMPS to avoid installation failure.
• ? Video wall configuration on DMC-4KZ-HDO cards may be lost after a power cycle or switcher reboot; recover by resending configuration values post-restart.
• ? DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn't support connecting LAN and Content LAN ports to the same subnet.
• ? DM-TX-200-C-2G HID routing may not survive a switcher reboot; routes need re-establishing post-endpoint online.
• ? Vertical bezel compensation value for DM-RMC-4KZ-SCALER-C doesn't persist across reboot; set programmatically as needed.
• ? Routing same to more than 8 DMC-4KZ-HDO outputs in DM-MD16x16/32x32-CPU3(-RPS) can sporadically fail to switch properly.
• ? Additional 15-20 seconds may be required for audio recovery post-reboot when Audio Breakaway is enabled on DM-MD32x32-CPU3.
• ? Double lock audio may occur during output switching in DM-MD32x32-CPU3.
• ? Web-based XPanel configuration tool lacks redundant power supply status for DM-MD8x8/16x16/32x32-CPU3(-RPS).
• ? DM-TX-4KZ-302-C DisplayPort may not work reliably with USB-C to DisplayPort adapters.
• ? TT-100 "Connect It" indicators are non-functional on DM-TX-4KZ-302/202-C USB HID port; use COMPUTER port instead if needed.
• ? DMCI-DMC-4KZ-C/-DSP and DMCI-DMC-4KZ-HD/-DSP symbol joins experience functionality issues.
• ? Swapping upstream may result in double audio lock with certain LG/Samsung Blu-Ray players.
• ? Incorrect video output when routing HDR sources to DMC-4K-HDO output cards.
• ? DMC-4K/4KZ-DSP cards don't down-mix DTS:X or Dolby Atmos to PCM 2ch audio.
• ? DM default 4k 60Hz 2CH/HBR EDID setup may produce unstable video on certain devices.
• ? Global EDID assignment via DM Tool may report false failures; input EDIDs should be assigned in batches.
• ? DMC-STR may report resolution of 0x0@0 when streaming from certain IP cameras.
• ? Apple keyboards may have connectivity issues with RMCs.
• ? All TXs (except TX-401-XX) may experience unreliable HDMI audio with 480i video resolution.
• ? Elapsed seconds, bitrate, and initiator feedbacks support removed from streaming cards to stabilize Crestron ToolboxTM.
• ? DMC-STR can lock up with unsupported audio formats (e.g., G.711); use AAC audio.
• ? Network issues may halt DMC-STR streaming; restart the stream to recover.

Update Instructions:

Nothing known