KNX AssociationHow are KNX systems configured for integration with other technologies such as BACnet, Modbus, ZigBee and others?
The integration of KNX systems with other technologies such as BACnet, Modbus, ZigBee and others is done via so-called "gateways" or "protocol converters". These devices translate the signals and data between the different systems and protocols so that they can communicate with each other.
The configuration of these gateways or protocol converters can vary depending on the manufacturer and model. However, usually certain parameters and settings, such as the IP address, port, and protocol used, must be configured in the device's settings.
You know a better answer?
The question about KNX Association KNX has already been answered, but there may be a better solution or alternative available by now. If you know it, answer the question now and increase your reputation as an industry expert in our B2B community.
Related QuestionsWith which knx actuator can the screentronic blind be controlled ?
Hi,
With which knx actuator can the screentronic blind be controlled without using the controltronic actuator ?
Thanks
Non sending group address and Central functions?
I use one group address for central functions with multiple non-sending objects. When I write a value they are only updated after I read them...
How are KNX systems used to control lighting, heating, air conditioning and other functions?
How are KNX systems used to control lighting, heating, air conditioning and other functions?
Stay up to date on KNX Association KNX
More from the Bus Systems & Standards section
Was the content helpful to you?
