The manufacturer QSC has not yet set up its devicebase profile. Content such as updates, compatibilities and support may only be maintained with a delay.
Update

Regular automatic saving

New Product Support

  • QIO-AES8x8
  • QIO-TEL2
  • Microsoft Teams Rooms UC Integration License
  • PL Series Performance Loudspeakers for Q-SYS
  • AcousticDesign Series: Zero Bezel Loudspeakers

Platform

  • Improvements to QIO, NL, and NM Series devices Status component
  • Core Manager: HTTP has been disabled

Audio

  • QIO Devices: Quiet Mode
  • SPA-Q component control for "Mute All"

Video

  • NV-21-HU: Dual Streaming

Control

  • Q-SYS Control for Microsoft Teams Room (MTR)
  • Background CSS Properties
  • Periodic Auto-Save
  • Monitoring Proxy updates
  • Control Panel Pages in Script Components
  • UCI Toolbox
  • Lua WebSocket Ping/Pong protocol
  • Scripting Components: 'Start Automatically' Property

Management

  • Core Manager and Enterprise Manager: Inventory Columns
  • Enable more robust passwords for users accessing Q-SYS Cores through Q-SYS Core Manager
  • Core Manager: QSD Authentication

Resolved Known Issues

  • Audio: The issue of QIO, NL, and NM Series devices showing “Fault - LAN A Streaming Error (Packet Missing)” when trying to sync to an external PTP clock announcing a non-zero originCurrentUTCOffset value has been resolved.
  • Audio: An issue causing the NL-SB42 speaker health monitor to falsely report in Open Circuit has been resolved.
  • Audio: The issue that would cause Softphone audio to not transmit out to RTP streams on Core 610 has been resolved.
  • Amplifiers: An issue that caused Custom Voicing in High and Low Pass Filters to be bypassed incorrectly has been resolved.
  • Video: USB compile check now accurately flags the endpoint count issue on NV-21-HU.
  • Video: The intermittent USB connection issue when using an NV-21-HU USB-C to USB-C cable for USB Bridging has been resolved.
  • Video: USB HID routing no longer experiences issues if designs contain both USB Audio Bridge Output and USB Video Bridge.
  • Video: Resolved an issue where NV-32-H Decoder encounters an error “Fault- Not Receiving video from <encoder name="">”.
  • Video: NV-21-HU now correctly displays 'Non-HDCP Source' in HDCP Status with USB-C connection.
  • Video: An issue that caused NV-32-H and NV-21-HU to show a green video on Encoder start up has been resolved.
  • Video: NV-21-HU firmware update now completes promptly without prolonged 'Reboot initializing' status.
  • Video: The issue that would cause a temporary flicker, black screen, or color change on an NV-32-H configured as a Decoder with dual HDMI outputs has been resolved.
  • Control: An issue that would force Control feedback to stop working on Q-SYS Control for MTR has been resolved.
  • Control: Resolved an issue where malformed CSS style sheet documents may cause Q-SYS Designer to unexpectedly close.
  • Control: Resolved the issue were assigning values to a list box control may cause an event handler to fire when the script first runs.
  • Control: MTR components configured with hostname connection no longer enter a fault state due to IP address changes during automatic nightly reboots.
  • Control: After updating to Windows 11, accessing 'Room Controls' on the touch panel no longer leads to a black screen and unresponsive controls.
  • Control: Connecting to a WebSocket server by name no longer causes script blockage during the connection phase.
  • Platform: In version 9.9 and running on a Core 610, the Gating Automatic Mic Mixer’s NOM Gain was fixed at 0dB. This has been corrected. The NOM Gain now again depends on the number of open microphones (NOM).
  • Platform: An issue that would allow unauthorized read/write access without authentication on a Redundant Core using rsync has been resolved.
  • Platform: The issue that caused the error "Design Exceeds the Memory Capability of the Core" has been resolved.
  • Platform: An issue that would cause Signal Tags to give an error 'Already in Use' within Containers has been resolved.
  • Platform: Mic Impedance not working on a Core 110f while in Peripheral Mode has been resolved.
  • Platform: QIO, NL, and NM Series devices no longer show "Missing in use by another design" when deploying a design.
  • Platform: Addressed an issue that would cause the QRC port to be inaccessible after a Primary Core failover.
  • Platform: The network flooding issue caused by random packet addresses has been resolved.
  • Platform: An issue causing a Core to stop running while using the Automatic Camera Preset Recall has been resolved.
  • Platform: You will no longer see any errors when assigning Signal Tags within a Container.
  • Platform: The issue of distorted audio from an External USB device has been resolved.
  • Platform: When adjusting the Network Tx Buffer from none to 5ms in an AES67 Transmitter appropriately increases by 5 ms.
  • Platform: The issue with the Inspector not showing the scripting engine requirement and the absence of the yellow license section in the menu bar has been resolved.
  • Platform: The issue of not being able to add a signal tag to a connection between a component with audio outputs and a signal snake has been resolved.
  • Platform: An issue with the Standard Delay component's distance control not being able to be set to zero has been resolved.
  • Platform: The component selection issue, where the "View Component Controls" menu didn't show details of the selected component, has been resolved. The details appear immediately upon selection.
  • Platform: The issue of the Virtual Page station not being able to be wired from inside a Container, despite the pin changing according to connection type, has been successfully resolved.
  • Platform: The issue where the Tx Flows in the Software Dante Blocks remained at "0/4" has been successfully resolved. The Tx Flows accurately reflect the active multicast flows.
  • Platform: An issue where the Status Block cannot be found in a Design has been resolved.
  • Platform: The issue where Microsoft Teams License Bundle appeared as Other License Type has been resolved.
  • Platform: Addressed an issue that would prevent designs from starting if Software Dante had run out of file handles.

Downgrade Notices

CAUTION: When downgrading firmware to an earlier version (i.e., v9.10 to v9.9.x or earlier), Access Control will be disabled and User Accounts will be lost.</encoder>

Version: 9.10.0 Link
Receive Important Update Messages Stay tuned for upcoming QSC Q-SYS Designer updates

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad