Is it possible to improve the resolution of the CX-30 in a way than it is at the beginning or is this due to the bandwidth this limits?
Maybe something can be changed in the settings?
Thanks for the feedback!
Answers
Top answer
Hello,
You have the possibility to make various settings via the web interface of the CX-30. You can select different output resolutions.
But here you should check in advance which physical resolution the display medium (TV/display/projector) has and adjust the ClickShare accordingly.
I also ask to note that the devices are regularly improved by firmware updates. The firmware can update the device automatically if it is connected to the internet, otherwise it has to be installed manually:
https://devicebase.net/en/barco-clickshare-cx-30/updates Take a look, here you will find updates for the ClickShare. These should always be installed. There are other ways to improve the quality of the image. For example, you can change the W-LAN frequency band to 5 GHz, which allows higher bandwidths to be transmitted. You will have to play around a bit with the configuration, as the installation location is always crucial. Try several settings.
You can also set the display resolution in the Display & Audio menu of the web interface. Check whether the maximum resolution is set there.
You know a better answer?
The question about Barco ClickShare CX-30 has already been answered, but there may be a better solution or alternative available by now. If you know it, answer the question now and increase your reputation as an industry expert in our B2B community.