Not a user yet?
Log in Register for free Suggest a product
ATEM Mini ProBlackmagic Design
ATEM Mini Pro
<1K views

how can i connect my camera via SDI-converter to cam1 input ?

When I start the Mini Pro with my camera connected to cam1 input via a sdi-cable plus converter the result is unusable. The same camera conected via hdmi on cam1 input works fine. What to do ?

Answers

Top answer

To connect a camera to the Cam1 input of the ATEM Mini Pro via an SDI converter, you must follow the procedure below:

  1. connect the SDI cable to the SDI output of your camera and the SDI input of the SDI converter.
    Connect the HDMI cable to the HDMI output of the SDI converter and the HDMI input of your camera. This will convert the signal from the camera to the correct format that the ATEM Mini Pro can handle.
    Connect the SDI cable to the SDI output of the SDI converter and the Cam1 input of the ATEM Mini Pro. 4.
    Make sure that the ATEM Mini Pro is set to the correct input mode. To do this, you must select the Cam1 input in the ATEM Mini Pro menu and set the correct input format (e.g. 1080p/60Hz).
  2. Make sure the camera is set to the correct output mode. Some cameras may require a special setting to work with an SDI converter.
    Turn on your camera and the ATEM Mini Pro. If everything is connected and set correctly, the image from the camera should display on the ATEM Mini Pro.

highmo
highmo / expert (2345)
 

You know a better answer?

The question about Blackmagic Design ATEM Mini Pro has already been answered, but there may be a better solution or alternative available by now. If you know it, answer the question now and increase your reputation as an industry expert in our B2B community.

To the product All questions

Related Questions Related Questions

How do I access the ATEM Mini Pro settings?

<1Kviews  Setup

Hello, is there a way to make settings for the ATEM Mini Pro? If so, what do I need to do this? Is there access...

1 Read answer

Is ATEM compatible with all projectors?

<1Kviews  Features  Setup

I have two projectors that work perfectly with the direct image from the camera (EPSON X36+ and EPSON X24+), but when the signal passes through...

Go to question

Is it possible to control it externally (via Crestron)?

<1Kviews

Is it possible to control the Blackmagic Design ATEM Mini Proit externally via Crestron?

1 Read answer

Receive Important Update Messages Stay up to date on Blackmagic Design ATEM Mini Pro

Was the content helpful to you?

Advertisement Advertise here?
Udemy IT certification ad