Add a Shortcut to another Miniserver

New

• Miniserver Shortcut function block
• Add a Shortcut to another Miniserver within the visualization
• A3D9-T1036: Status Monitor
• Keep an eye on your devices, states, and values with our new generic monitoring block
• Door And Window Monitor:
• Allow nesting of Door and Window Monitor objects
• Allow select of gate controller
• Meter: Detection and prevention in invalid Meter Readings
• Decreases in the Meter Reading are not allowed anymore
• Major increases are detected
• An invalid change is now detected when the single meter change is bigger than the current Meter Reading and bigger than 10000
• Only if the time difference since the last value change is smaller than 8h
• User will be informed via System Message
• System Message can be deactivated
• Network Devices: Address Resolve Fallback
• If the Miniserver fails to connect to the defined hostname/address it will try to find the correct address by searching for the device in the network
• This enables a connection to the device even if the network settings were misconfigured
• Hostname entered but the device set to a static IP
• IP entered but the device has gotten a new IP via DHCP
• Supported on Miniserver Gen.2 for Loxone Network Devices (Audioserver, Intercom)
• Added Portuguese
• Loxone Config Instance handling
• When a config is already running double clicking a project file now will not start an additional instance of Loxone Config
• NFC Authentication Block: Import NFC Tags and Access Codes from CSV
• BG-I25937 Scene: Added LineIn action
• BG-I27642 Burglar Alarm: add support for combined window contact
• New Miniserver Connect Dialog
• New Miniserver Keychain Dialog
• A3D9-T1121 User Import: Import NFC Tags and Access Codes from CSV
• Hardened security: Webservices need to be authenticated with a token with the proper rights, when a token is used
• A3D9-T1085 Window: Added output for target position and input for current position (Can be used with Schüco Windows)
• Matter (0.3.0)
• various fixes
• upgraded to Matter 1.2
• M-Bus Device: Add sequence number property to analogue inputs
• DALI extension firmware update DALI device types 0-6 support smart actors
• A3D9-T1035 Automatic Designer: add action “Gate: partially open”

Fixed

General

• Ac Control: Wrong type text used for gree/sinclair ac control
• BG-I28029 Admin Interface reachable when configuring via Internet is disabled
• BG-I27980 Central Shading: Safety-Reason for “Wa” not remanent
• BG-I27953 Tree-Filter does not compare room/category names
• BG-I28023 Network Intercommunication: Smart/T5-sensors not received when using encryption
• BG-I27543 Tuneable white Dali dimmer is not working when the colour temperature is not used
• Memory Leak when converting document
• BG-I26050 Device learning dialogs: same device couldn’t be learned out and in again in the same learning session
• BG-I26046 Saving project to Miniserver while device diagnostics were running left diagnostics in undefined state
• BG-I28019 room settings (Combobox settings in general) didn’t work as expected in learning dialogs
• BG-I27690 Devices with a single sub device were merged
• BG-I27475 Documentation has missing descriptions for IOs
• BG-I27693 Optical/Audible identify context menu action not disabled when not connected to the Miniserver
• BG-I27761 Auto Connect to Miniserver does not properly use address settings from project as fallback
• BG-I27687 Generic View Column filters not showing ampersands
• BG-I27688 Unable to distinguish Miniserver captions in template insertion dialog
• BG-I27834 Network device search uses full qualified hostname, this leads to problems when the domain changes
• BG-I27722 Connection of memory flag gets lost when changing referenced object via settings
• BG-I26559 External IO/Memory Flags are not sent to other Miniserver when value changes at SPS restart
• Addon webservice does not check token rights
• Tokens marked for deletion still work as Bearer Token for some time
• An Error message is displayed when using multiple virtual UDP inputs with the same port, even if it does not cause any problems
• BG-I27702 Ac Control Air Dialog: prevent unselecting all items
• BG-I25264 Device learning dialogs: identify command was sent in too many situations (e.g. after editing of device properties)
• updated Alexa (0.4.0) and Husqvarna (1.0.8) addons
• BG-I27413 RS485 Extension shows device limitation
• BG-I27462 PS & B not in a room from planning tool
• BG-I27369 Sequence Controller does not output “%” sign
• BG-I26196 Automatic designer: API connector not working
• BG-I27739 Window remanence of current position not working
• BG-I27739 Window has a remanence parameter
• BG-I22821 Find and Replace All replaces goes through all objects twice
• BG-I27551 Backup webservice uses too much RAM use SD card for storing files instead
• Increased some font sizes
• BG-I27442 Status: Output does not show all decimal places in LiveView/Simulation
• BG-I27418 Project Backups don’t show full note if project path contains special characters
• BG-I27507 Managed Tablet: Childs (e.g. Online status) don’t take over room of tablet
• Virtual HTTP command recognition window cant retrieve data from Miniserver anymore
• BG-I27506 Error output state of sensors/inputs not remanent
• BG-I27552 Miniserver search: Increased minimum size for buttons
• BG-I27553 Exchanged Miniserver search and keychain buttons
• BG-I27227 KNX Monitor: showed wrong device name for extended actors in some instances
• BG-I27227 LiveView: no yellow highlight for negative values on analogue sensors
• BG-I26846 IO from another Miniserver controlled via LiveView shows wrong value after page change
• Managed Tablets: Version not displayed in device status & battery level shown in red
• Plugin mTLS authentication not working in some cases
• BG-I27382 Window without text can be selected in the mode ‘Freely position windows’
• Program shown as not identical when loading from Miniserver
• Plugin shown offline in device status
• BG-I27378 Input references not always sorted in front of function blocks in the list which is handled by the SPS resulting in different behaviours depending on the insertion order
• M-Bus Extension: devices show invalid secondary addresses starting with 7F:FF:FF:FF
• BG-I23250 DALI light is turned WHITE and then RED and we send only RED to it
• BG-I27323 Ac Control: AutoConnect for Temperature and Window Contact
• BG-I27279 Tree-icon inverted in Device status & Quick search
• BG-I27455 Unpair warning message is shown when deleting a trusted intercom
• BG-I27456 Managed Tablet App Location Filter shows duplicate results
• Disabling default software rendering (since it caused problems on some multi-monitor setups)
• can be reenabled with LX_SOFTWARE_RENDERING=1 env variable where needed
• Miele@Home Update translationsBG-I28087 Wrong error message when trying to insert logger/mailer/caller on a different Miniserver
• Config connects locally with the external address to the Miniserver if the internal address is missing in the Keychain
• BG-I28117 Config Caption bar shows ‘connecting’ but it already has failed
• Miniserver Backup via webservice fails due to watchdog timeout
• Home Connect: Rate limit is hit when plugin starts
• Removed preselection of save path when saving documents
• Hidden feature which leads to errors when project was copied
• BG-I28187 Miniserver is unable to download auto update within the defined timeout of 3 minutes -> doubled the timeout
• BG-I28130 Miniserver Keychain: Connect to remote connect Miniserver fails with error message
• Read System messages not set to unread when being retriggered (e.g. Audioserver Spotify info messages)
• BG-I28329 HealthCheck selection: remove option for MS-Gen1 Miniserver-Diagnosis
• Device Status: Actions for tree-branches on client miniserver executed on wrong miniserver
• BG-I28278 Miniserver-Diagnosis fixed typo when client miniserver is offline
• BG-I28277 Link/Tree Diagnosis stuck when client miniserver is offline
• BG-I28138 Managed Tablet is not shown with correct name in Control History
• BG-I28293 Race Condition when starting update on different Miniservers in parallel, resulting in project mix-up
• BG-I28274 No message when doing search & replace and text was not found
• BG-I28230 Miniserver Connection: Wrong error message when Miniserver is registered but does not have Internet
• Converted stored connection data is incorrect for Miniserver Gen.1 which use CloudDNS since it has stored an outdated resolved IP
• BG-I28354 & BG-I28154 Intercommunication: Empty text or text starting with special characters not sent
• BG-I28168 LiveView: Intercommunication T5 output can’t be switchedBG-I28148 Sequence Controller: focus lost when renaming variables/inputs/outputs
• BG-I26198 Sequence Controller: changing variable name does not replace variables in all sequence pages
• BG-I28318 Connection reference on math function block does not show a value in LiveView/Simulation
• BG-I28384 Drag and Drop multiselection allows connection of an output to an input and vice versa
• Possible queue overflows when sending messages to Link or internal Tree of Miniserver
• BG-I28293 Race Condition when two configs save to a Miniserver in parallel

Devices & Extensions

• Nano Dimmer Air US
• BG-I27499 No system status message for short circuit
• Fix for production test
• System temperature is sent two times after startup
• Extend air diagnosis on Door and Window Contact Air, Touch Air and NFC Code Touch Air
• Dali
• DALI fading time bugfix for smart actuators
• BG-I23250 DALI light is turned WHITE and then RED and we send only RED to it
• DALI address 0 starts identifying when the DALI extensions is identified
• Reconnect to Audioserver after saving to Miniserver takes very long
• BG-I27719 Touch Pure Flex: Long button press does not properly reset back to zero when releasing the button
• M-Bus Extension: Do not monitor 8-bit M-Bus device status field due to a high number of false positives
• Dali Firmware 14.07.02.08
• BG-I27853 fixed control of DALI actors
• Random DALI identify
• Miniserver, Miniserver Go, Miniserver Compact coprocessor Firmware 14.7.2.14
• Fixed multiple routing of messages to Link interface
• Fixed initialization of internal Tree
• Improved error statistics
• Tree Extension Firmware 14.7.2.14
• Fixed multiple routing of link legacy packets causing lost packets under high bus load
• Fixed possible missed packets on Tree branches under high bus load
• Fixed possible delays when one Tree branch is faulty or unused causing lost packets under high bus load
• Improved error statistics
• Nano DI Tree Firmware 14.7.2.14
• BG-I18791 Fixed possible packet losses
• Touch Tree Firmware 14.7.2.14
• BG-I23335 Fixed possible packet losses
• Extension Firmware 14.7.2.14
• BG-I18935 Extension sends inputs delayed
• BG-I18613 Touch Pure Flex: Config does not allow characters (# & $) even if they are supported by the device

Shading

• BG-I27030 Geiger SOLIDline ZIP Air: dwc input not working after Obstacle detected

Audio

• BG-I28113 Audio Player: end of presence does not pause manually started music
• BG-I28114 Audio Player: presence does not start music during active event
• BG-I28146 Audio Player: outputs V+/V# trigger when no music is playing
• BG-I28137 Music Extension: no System messages shown when extension is not used on a Player
• Music Extension: add System message for high CPU Temperature
• Miniserver creates invalid init message when connecting to network devices (Audioserver, Intercom) causing pairing errors (invalid Base64 encoding)
• BG-I28305 Audio Player: Bell immediately stops on falling edge of input instead of playing the whole file
• BG-I28353 Audio Central: TTS retriggered on SPS restart
• BG-I28385 Audio Player: Event stays active after restart
• BG-I27958 fix USB/SD Content mixed up in wrong order
• BG-I27892 cleanup of tts files when exceeding 100M, changed to delete files >= 2d (was 7d)
• BG-I27916 fix crash in TunineSourceFinder
• BG-I28037 fixed issue with Radio Station that sends stream instead of m3u urls
• BG-I28404 fixed missing Contextual Info in Queue view
• BG-I28358 fixed adding custom urls Streaming Servers that do not support HEAD Requests
• Issue where spotify locally started causes other Players in fixed group (singlemode) to start too.
• Eemoved Stream Prebuffering causing latency issues in Radio playback
• Spotify no playback but shows visual playback (former spotifyconnect patch)
• ‘New Audioserver Software’ reports did not work due to timeouts
• Stream Error Handling for unplayable streams improved
• Race conditions that can cause a crash on event playback
• Performance optimizations for Miniserver Compact Audio distribution on local Tree Turbo
• Volume+ command on muted playergroup causing the volume to increase on one player
• Player Default Volumes did not sync on startup could cause unexpected behaviour
• Issue where System Status Messages and Callback Actions were not reliably forwarded
• Custom Sound Event Volumes

Climate

• BG-I27771 Intelligent Room Controller: Multiple history entries when starting timer during manual calendar temperature
• BG-I28129 Intelligent Room Controller: Presence does not extend Comfort mode started by input “C”
• Intelligent Room Controller: improved text for history-entry “source blocked”

Lighting

• BG-I27718 Lighting Controller: Inconsistent Capitalization in English
• Light controller: invalid output value for rgb-only smartactors

Energy

• BG-I27409 Copy of Wallbox which is managed by Wallbox Manager
• BG-I27053 Wallbox: limitation via Api connector not remanent
• BG-I27525 Wallbox Manager: Change of priority price not directly forwarded to Wallboxes
• BG-I26303 Wallbox: Lcl output doesn’t use specified unit
• BG-I26268 Wallbox Gen.1: wrong calculation of E1/E2
• BG-I27927 Wallbox: System message Supply drop can’t be quitted
• BG-I26899 Wallbox behaving incorrectly when Vc output is inverted
• Wallbox Manager: Loads not activated
• Quick Search: Energy Flow Monitor not shown as top result
• BG-I27705 Energy Flow Monitor: Rest node does not use defined units

Multiplicator

• BG-I27242 Multiplicator: Miniserver dialog allows duplicate serials
• BG-I27508 Multiplicator: Disinheriting also goes across input references this results in disinheritance of large logic blocks even if they only connection is using the same inputs
• BG-I28153 Multiplicator: Custom Changes (Expert mode) on disinherited controls removes them from project when loading from Miniserver

Trust

• BG-I27820 Trust user group disappears
• Trust Webservices not working anymore
• Trust Link authentication not working

Auto Configuration

• BG-I27314 Dali outputs used even if they are already in a group
• Managed Tablet can get created multiple times
• BG-I27684 Removed unnecessary control hint text

Diagnostics

• BG-I27867 Tree Monitor does not show all information for intercommunication packets
• Link Monitor displays wrong commands

Project Planning

• BG-I27402 Special characters in room and category names
• BG-I28028 Audio products are planned with the peak power usage

Stability

• High SPS CPU load when there are lots of online states in the project
• Miniserver reboot when receiving invalid text memory value from a client
• Miniserver reboot when syncing of files to SD card takes too long
• Config hangs when saving project
• BG-I27532 Config crash when starting dali learning dialog
• BG-I27538 Config crash when deleting entries from Miniserver Keychain
• BG-I27339 Config crash when loading from Miniserver
• BG-I27589 Config crash when opening default screen setting of managed tablets from setting dialog
• Trust: Miniserver reboot when user is deleted due to race condition
• BG-I27619 Config crash when importing project
• BG-I27821 Config crash when saving to Miniserver
• BG-I27909 Config crash when loading from Miniserver
• BG-I27639 Config crash when doing an Undo while Monitor was opened
• BG-I28182 Config crash when opening Wallbox Manager or EFM dialog out of setting edit dialog
• BG-I28018 Config crash when resetting multiplicator changes
• BG-I27821 Config crash when saving to Miniserver